Back to catalogue
Lambda sensor Audi A6 C5 Saloon 2.7 T quattro 250 hp Petrol
Info: AUDI A6 C5 Saloon (4B2) 2.7 T quattro
- Manuf. year (from - to): 08.2001-01.2005
- Power [kW]: 184
- Power [hp]: 250
- Cylinder capacity (cc): 2671
- Engine type: Petrol Engine
- Car body type: Saloon
- Engine code: BES
- Manufacturer's model designation: 4B2, C5
- Catalytic Converter: with 3 way catalyst
- Fuel Supply: Intake Manifold Injection/ Carburettor
- Engine Design: V
- Exhaust Emission Norm: ...
- Transmission: ...
- Model year from: ...
- Model year to: ...
-
Please rate this productIn stock£ 55,98incl. 20% VAT,
excl. delivery costs- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 4B-2-000001
- Thread Size:
M18 - Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 730
- Number of pins:
4 - Overall Length [mm]: 757
- Supplementary Article / Supplementary Info Info 2: with plastic socket, with heat shield pipe, with mounting manual
- Spanner Size: 22
- Rated Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article / Supplementary Info: with cable tie
- Thread Pitch [mm]: 1,5
- Lubrication: with grease lubrication
- Full Set:
- Condition: Brand new
Show OEM numbers -
Article №: 81549EPlease rate this productIn stock£ 56,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Unheated
- Cable Length [mm]: 630
- Number of pins: 4
- for OE number: 06A906262AS
- Quality: OE EQUIVALENT
- Condition: Brand new
Show OEM numbers -
Article №: B16929Please rate this productIn stock£ 57,58incl. 20% VAT,
excl. delivery costs- Quantity: 2
- Required quantity: 2
- Oxygen Sensor: Heated
- Number of pins: 4
- Overall Length [mm]: 750
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Article №: 6PA 358 066-401Please rate this productIn stock£ 57,68incl. 20% VAT,
excl. delivery costs- Fitting Position: Left, Right, Front, before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Planar probe
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Condition: Brand new
Show OEM numbers -
Article №: 81097EPlease rate this productIn stock£ 58,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Required quantity: 2
- Oxygen Sensor: Unheated
- Cable Length [mm]: 1050
- Number of pins: 4
- for OE number: 058906265B
- Quality: OE EQUIVALENT
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 58,38incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: ARE, BES
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Length [mm]:
![Lambda sensor 1800 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
1800 - Number of circuits:
4 - Condition: Brand new
Show OEM numbers -
Article №: V10-76-0015Please rate this productIn stock£ 60,18incl. 20% VAT,
excl. delivery costs- Product line: Original Quality
- Fitting Position: Left Front, Right Front, after catalytic converter, before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Cable Length [mm]: 720
- Number of circuits: 4
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: 0893175Please rate this productIn stock£ 60,78incl. 20% VAT,
excl. delivery costs- Supplementary Info: OE-PART
- Construction Year to: 05/2004
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of pins: 4
- Overall Length [mm]: 750
- Recommended change interval [km]: 160000
- Supplementary Article / Supplementary Info Info 2: without adapter
- Connector/Clamp: Connector may need adjustment
- Socket colour: black, brown
- Condition: Brand new
Show OEM numbers -
Article №: 59-0015Please rate this productIn stock£ 61,08incl. 20% VAT,
excl. delivery costs- Construction Year to: 05/2004
- Oxygen Sensor: Regulating Probe
- Construction Year to: 05/2004
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- Oxygen Sensor: Heated
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Article №: V99-76-000110/10 Based on over 1 customer ratingsIn stock£ 61,68incl. 20% VAT,
excl. delivery costs- Supplementary Info: EXPERT KITS +
- TecDoc Engine Number: ARE, BES
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Finger probe, Heated, Thread pre-greased
- Fitting Position: after catalytic converter
- Cable Length [mm]: 210
- Number of pins: 4
- Length [mm]: 350
- Number of circuits: 4
- for OE number: V99760001
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: 09SKV641Please rate this productIn stock£ 61,78incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor, Regulating Probe
- Length [mm]: 980
- Number of circuits: 4
- Weight [kg]: 0,17
- Voltage [V]:
![Lambda sensor 12 Voltage [V]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/6.png)
12 - Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: DOX-2030Please rate this productIn stock£ 62,18incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left, Right
- Construction Year to: 06/2002, 05/2004
- Construction Year from: 07/2002
- TecDoc Engine Number: ARE, BES
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 1900
- Number of pins: 4
- for OE number: 030906262N
- Quality: OE
- Weight [g]: 115
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 148
- Condition: Brand new
Show OEM numbers -
Article №: ESL-AU-002Please rate this productIn stock£ 64,18incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position:
before catalytic converter - Number of circuits: 5
- Fabrication Number: ESL-AU-002
- Condition: Brand new
Show OEM numbers -
Article №: 6PA 358 066-3918.0/10 Based on over 1 customer ratingsIn stock£ 64,68incl. 20% VAT,
excl. delivery costs- Fitting Position: Left, Right, Front, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Regulating Probe
- Cable Length [mm]: 1750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Condition: Brand new
Show OEM numbers -
Article №: V10-76-0124Please rate this productIn stock£ 65,78incl. 20% VAT,
excl. delivery costs- Supplementary Info: Original VEMO Quality
- Catalytic Converter Type: with three-way catalytic converter
- TecDoc Engine Number: ARE, BES
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Regulating Probe
- Thread Size: M18x1,5
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Cable Length [mm]: 355
- Number of pins: 4
- Length [mm]: 560
- Number of circuits: 4
- for OE number: 022 906 262 BG
- Connector Shape: D Shape
- Socket colour: black
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: V99-76-000210/10 Based on over 1 customer ratingsIn stock£ 67,18incl. 20% VAT,
excl. delivery costs- Supplementary Info: EXPERT KITS +
- Construction Year to: 06/2002
- Vehicle Identification Number (VIN) from: 4B-2-000 001
- Quantity: 2
- Fitting Position: before catalytic converter
- Oxygen Sensor: Planar probe, Heated, Thread pre-greased
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0,09
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: V10-76-0018Please rate this productIn stock£ 68,68incl. 20% VAT,
excl. delivery costs- Product line: Original Quality
- Construction Year to: 06/2002
- Engine Code: ARE
- Fitting Position: Left
- Construction Year to: 06/2002
- Engine Code: ARE
- Fitting Position: Right
- Construction Year from: 07/2002
- Construction Year to: 05/2004
- Engine Code: BES
- Fitting Position: Left
- Construction Year from: 07/2002
- Construction Year to: 05/2004
- Engine Code: BES
- Fitting Position: Right
- Thread Size: M18 x 1,5, M18x1,5
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of pins: 4
- Length [mm]: 700
- Number of circuits: 4
- for OE number: 030 906 262 L
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: black
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: V10-76-0091Please rate this productIn stock£ 69,48incl. 20% VAT,
excl. delivery costs- Supplementary Info: Original VEMO Quality
- Engine Code: ARE, BES
- Required quantity: 2
- Oxygen Sensor: Thread pre-greased
- Number of pins: 4
- Overall Length [mm]: 1800
- Recommended change interval [km]: 160000
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 8,2
- Condition: Brand new
Show OEM numbers -
Lambda sensor QUINTON HAZELL XLOS1137 before catalytic converter, Oxygen SensorArticle №: XLOS1137Please rate this productIn stock£ 70,08incl. 20% VAT,
excl. delivery costs- Fitting Position: before catalytic converter
- Construction Year to: 06/2002
- Construction Year from: 07/2002
- Vehicle Identification Number (VIN) from: 4B-2-000 001
- Quantity: 2
- Required quantity: 2
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 680
- Number of pins: 4
- Length [mm]: 135
- Condition: Brand new
Show OEM numbers -
Article №: V10-76-0060Please rate this productIn stock£ 70,98incl. 20% VAT,
excl. delivery costs- Product line: Original Quality
- Construction Year to: 05/2004
- Engine Code: ARE,BES
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Thread pre-greased
- Cable Length [mm]: 225
- Number of pins: 4
- Length [mm]: 350
- Conductor Number:
4 - Version: ZR-PLANAR
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers
Oxygen sensor for Audi A6 Saloon (4B2, C5) 2.7 T quattro – the best products as chosen by customers
Customers also shopped for
Engine
A6 Saloon (4B2, C5) 2.7 T quattro Petrol 250 hp / 184 kW
- EGR valve Audi A6 C5 Saloon 2.7 T quattro
- Catalytic converter Audi A6 C5 Saloon 2.7 T quattro
- Exhaust silencer Audi A6 C5 Saloon 2.7 T quattro
- Exhaust pressure sensor (DPF) Audi A6 C5 Saloon 2.7 T quattro
- Exhaust gas temperature sensor Audi A6 C5 Saloon 2.7 T quattro
- Mounting kit, exhaust system Audi A6 C5 Saloon 2.7 T quattro
- Exhaust pipe Audi A6 C5 Saloon 2.7 T quattro
- Flex pipe Audi A6 C5 Saloon 2.7 T quattro
- Exhaust manifold gasket Audi A6 C5 Saloon 2.7 T quattro
- Exhaust hanger Audi A6 C5 Saloon 2.7 T quattro
Bestsellers
AUDI A6 Saloon (4B2, C5) 2.7T quattro
Lambda sensor
For other models of AUDI
-
Fast delivery
Shipping methods
-
