reset
or
Enter your registration no below
Search
Parts catalogue: VALEO Clutch kit SAAB 99
SAAB 99 Petrol
- VALEO Clutch kit SAAB 99 Saloon 2.0 GL 100 hp 09/1974 - 12/1984
- VALEO Clutch kit SAAB 99 Combi Coupe 2.0 Turbo 146 hp 10/1977 - 06/1980
- VALEO Clutch set Saab 99 Combi Coupe 2.0 107 hp 03/1976 - 05/1978
- 99 Combi Coupe 1.7 80 HP 08/1968 - 05/1971
- VALEO Clutch set Saab 99 Saloon 2.0 95 hp 10/1972 - 08/1974
- VALEO Clutch and flywheel kit 99 Saloon 2.0 EMS 110 hp 04/1972 - 08/1974
- VALEO Clutch and flywheel kit 99 Saloon 2.0 EMS 118 hp 09/1974 - 12/1978
- 99 Combi Coupe 1.85 88 HP 10/1970 - 05/1974
- 99 Combi Coupe 2.0 100 HP 09/1974 - 12/1979
- 99 Combi Coupe 2.0 110 HP 02/1979 - 01/1984
- 99 Saloon 2.0 86 HP 09/1971 - 12/1974
- 99 Combi Coupe 2.0 i 118 hp 01/1981 - 12/1984
- 99 Saloon 2.0 EMS 116 HP 07/1976 - 07/1981
- 99 Combi Coupe 1.85 i 97 HP 10/1971 - 09/1972

Best selling car spares from VALEO SAAB 99
- Brake pads
- Oil filter
- Fuel filter
- Wiper blades
- Water pump
- Spark plugs
- Ignition coil
- Fuel pump
- Thermostat
- Brake fluid
- Antifreeze
- Racing brake pads
- Performance clutch
- Ignition leads
- Windscreen wiper arm
- Radiator fan switch
- Distributor rotor
- Ignition distributor
- Repair kit, distributor
Bestsellers: Clutch and flywheel kit VALEO Saab 99
-
- Number of Teeth: 20
- Product line: FULLPACK DMF (CSC)
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- New Part:
- Weight [kg]: 20,61, 20,43
- Number of mounting bores: 6
- Bore Diameter [mm]: 34
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 55
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- only available in set:
- Condition: New
Detailsfree deliveryArticle № : 837300 VALEO Clutch set 8199493
Car parts maker: VALEOIn stock
£ 479,98incl. 20% VAT -
- Number of Teeth: 14
- Product line: KIT3P (CSC)
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part:
- Hub Profile: 18,7 x 15,7
- Weight [kg]: 4,52
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 200
- Condition: New
Detailsfree deliveryArticle № : 834423 VALEO Clutch and flywheel kit 8198213
Car parts maker: VALEOIn stock
£ 177,08incl. 20% VAT -
- Number of Teeth: 20
- Product line: MODULE DMF
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with lock screw set, with clutch disc
- New Part:
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Weight [kg]: 18,72
- Extention Force [N]: 6400
- Number of mounting bores: 6
- Tightening Torque [Nm]: 30
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Detailsfree deliveryArticle № : 836055 VALEO Clutch replacement kit 1110425
Car parts maker: VALEOIn stock
£ 438,08incl. 20% VAT -
- Number of Teeth: 14
- Product line: KIT3P (CSC)
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part:
- Hub Profile: 18,6 x 15,7
- Weight [kg]: 4,71
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 203
- Condition: New
Detailsfree deliveryArticle № : 834243 VALEO Clutch parts 8198211
Car parts maker: VALEOIn stock
£ 165,28incl. 20% VAT -
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- New Part:
- Weight [kg]: 19,63
- Number of mounting bores: 6
- only to be used within set:
- Bore Diameter [mm]: 34
- Tightening Torque [Nm]: 160
- only available in set:
- Condition: New
Detailsfree deliveryArticle № : 837443 VALEO Complete clutch kit 16605811
Car parts maker: VALEOIn stock
£ 790,18incl. 20% VAT -
- Number of Teeth: 23
- Product line: KIT4P - CONVERSION KIT (CSC)
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part:
- Weight [kg]: 19
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 160
- Clutch Pressure Plate Outer Diameter [mm]: 239
- Condition: New
Detailsfree deliveryArticle № : 845149 VALEO Clutch kit 7950941
Car parts maker: VALEOIn stock
£ 483,18incl. 20% VAT -
- Number of Teeth: 14
- Product line: KIT2P
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part:
- Hub Profile: 18,65 x 15,70
- Weight [kg]: 4,23, 4,198
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 200
- Condition: New
DetailsArticle № : 821303 VALEO Clutch set 1107981
Car parts maker: VALEOIn stock
£ 96,58incl. 20% VAT -
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part:
- Hub Profile: 26,4 x 23,2
- Weight [kg]: 7,8
- Clutch: for vehicles with push type clutch
- Bore Diameter [mm]: 34
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
Detailsfree deliveryArticle № : 834583 VALEO Clutch and flywheel kit 18971632
Car parts maker: VALEOIn stock
£ 282,08incl. 20% VAT -
- Supplementary Info: KIT4P - CONVERSION KIT
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Special tools for mounting not necessary
- New Part:
- Hub Profile: 26 x 23
- Weight [kg]: 17,74
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Extention Force [N]: 6200
- Tightening Torque [Nm]: 160
- Clutch Pressure Plate Outer Diameter [mm]: 239
- Condition: New
Detailsfree deliveryArticle № : 835149 VALEO Clutch replacement kit 7696512
Car parts maker: VALEOIn stock
£ 450,88incl. 20% VAT -
- Number of Teeth: 14
- Supplementary Article / Supplementary Info: with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: without sensor
- New Part:
- Weight [kg]: 5,78, 6,4
- Bore Diameter [mm]: 34
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Detailsfree deliveryArticle № : 834266 VALEO Clutch parts 13776711
Car parts maker: VALEOIn stock
£ 325,58incl. 20% VAT -
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part:
- Hub Profile: 26,5 x 23,2
- Weight [kg]: 6,49
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Detailsfree deliveryArticle № : 834090 VALEO Complete clutch kit 7143766
Car parts maker: VALEOIn stock
£ 224,98incl. 20% VAT -
- Number of Teeth: 23
- Product line: KIT2P
- Supplementary Article / Supplementary Info: without central slave cylinder
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- New Part:
- Hub Profile: 26,47 x 23,41
- Weight [kg]: 5,83
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Detailsfree deliveryArticle № : 826777 VALEO Clutch kit 1108785
Car parts maker: VALEOIn stock
£ 168,68incl. 20% VAT -
- Number of Teeth: 14
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- New Part:
- Weight [kg]: 18,48, 18,8
- Number of mounting bores: 10
- only to be used within set:
- Bore Diameter [mm]: 34
- Tightening Torque [Nm]: 70
- only available in set:
- Material: Aluminium
- Condition: New
Detailsfree deliveryArticle № : 837501 VALEO Clutch set 20265226
Car parts maker: VALEOIn stock
£ 565,58incl. 20% VAT -
- Number of Teeth: 14
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- New Part:
- Weight [kg]: 17,08
- Number of mounting bores: 8
- Tightening Torque [Nm]: 70
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
Detailsfree deliveryArticle № : 837542 VALEO Clutch and flywheel kit 18251912
Car parts maker: VALEOIn stock
£ 627,68incl. 20% VAT -
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part:
- Hub Profile: 26 x 23
- Weight [kg]: 6,98, 7,05
- Clutch Pressure Plate Outer Diameter [mm]: 251
- Condition: New
Detailsfree deliveryArticle № : 832513 VALEO Clutch replacement kit 15241078
Car parts maker: VALEOIn stock
£ 286,88incl. 20% VAT -
- Number of Teeth: 14
- Supplementary Article / Supplementary Info: with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: without sensor
- New Part:
- Weight [kg]: 7,62
- Bore Diameter [mm]: 34
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Detailsfree deliveryArticle № : 834352 VALEO Clutch parts 13776736
Car parts maker: VALEOIn stock
£ 315,28incl. 20% VAT -
- Number of Teeth: 14
- Supplementary Article / Supplementary Info: with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: without sensor
- New Part:
- Weight [kg]: 6,54
- Bore Diameter [mm]: 34
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Detailsfree deliveryArticle № : 834343 VALEO Complete clutch kit 13776734
Car parts maker: VALEOIn stock
£ 341,28incl. 20% VAT -
- Number of Teeth: 14
- Product line: KIT4P - CONVERSION KIT (CSC)
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part:
- Weight [kg]: 19,51
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 45
- Clutch Pressure Plate Outer Diameter [mm]: 239
- Condition: New
Detailsfree deliveryArticle № : 845125 VALEO Clutch kit 7950947
Car parts maker: VALEOIn stock
£ 617,38incl. 20% VAT -
- Number of Teeth: 14
- Product line: KIT4P - CONVERSION KIT
- Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
- New Part:
- Hub Profile: 22 x 25
- Weight [kg]: 19,04
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 45
- Clutch Pressure Plate Outer Diameter [mm]: 239
- Condition: New
Detailsfree deliveryArticle № : 835125 VALEO Clutch set 7625029
Car parts maker: VALEOIn stock
£ 523,58incl. 20% VAT -
- Number of Teeth: 23
- Product line: KIT2P
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part:
- Weight [kg]: 7,92, 8,02
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
Detailsfree deliveryArticle № : 828367 VALEO Clutch and flywheel kit 7355866
Car parts maker: VALEOIn stock
£ 711,58incl. 20% VAT
VALEO Clutch kit: product lines
Clutch kit for top SAAB 99 models
Catalogue of brands:





Other spare parts from VALEO
-
Best prices
Buycarparts.co.uk guarantees high-quality car parts at very attractive prices.
-
Wide choice
We currently have over 500,000 car parts in our product range.
-
Save on shipping
Free shipping within the UK applies to orders over £ 130 and excludes bulky items, tyres, or core parts.
-
Fast delivery
Shipping methods
-
Please rate this product
Parameters rating
Product cost
+ -Product quality
+ -Packaging quality
+ -Manufacturer
+ -Warranty
+ -Product cost
+1 -1Product quality
+1 -1Packaging quality
+1 -1Manufacturer
+1 -1Warranty
+1 -1