VW Atlas Cross Sport (CMC_) Clutch
Find current offers for other spare parts
Clutch kit
Flywheel
Clutch master cylinder
Clutch slave cylinder
Central slave cylinder clutch
Clutch plate
Clutch pressure plate
Clutch release bearing
Clutch cable
Clutch fork
Flywheel bolt
Clutch switch
Sleeve
Clutch pipe
Clutch pilot bearing
Clutch slave cylinder repair kit
Release set, clutch operation
reset
Other car parts
Wheel drive
Belt / chain drive
Electrics
Engine
Heating and ventilation
Wiper and washer system
Fuel supply system
Air conditioning
Clutch system for Top modells
Bestsellers: Clutch VW ATLAS CROSS SPORT CMC_
-
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Details
free deliveryArticle № : 600 0017 00 LuK 600 0017 00
Car parts maker: LuK(5)In stock
£ 303,08incl. 20% VAT -
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info: without pilot bearing
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Details
free deliveryArticle № : 600 0016 00 LuK 600 0016 00
Car parts maker: LuK(7)In stock
£ 302,28incl. 20% VAT -
- Number of Teeth: 28
- Product line: KIT4P - CONVERSION KIT
- Supplementary Article / Supplementary Info: with single-mass flywheel
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing, Requires special tools for mounting
- New Part:
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,02
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Details
free deliveryArticle № : 835159 VALEO 835159
Car parts maker: VALEO(1)In stock
£ 280,18incl. 20% VAT -
- Diameter [mm]:
![240 Diameter [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/200.png)
240 - Number of Teeth: 23
- Product line: ZMS Modul XTend plus CSC
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Mounting Type: not pre-mounted
- Condition: New
Details
free deliveryArticle № : 2290 601 060 SACHS 2290 601 060
Car parts maker: SACHS(2)In stock
£ 515,92incl. 20% VAT - Diameter [mm]:
-
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel without friction control plate
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Details
free deliveryArticle № : 600 0295 00 LuK 600 0295 00
Car parts maker: LuK(3)In stock
£ 499,18incl. 20% VAT -
- Transmission Type: Manual Transmission
- Number of mounting bores: 6
- Number of Teeth: 135
- Max. Clearance Angle [Degree]: 18
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info Info 2: Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
Details
free deliveryArticle № : 415 0431 10 LuK 415 0431 10
Car parts maker: LuK(2)In stock
£ 288,48incl. 20% VAT -
- Diameter [mm]: 240
- Parameter: 240TD
- Hub Profile: 21,8x24,2-23
- Number of Teeth: 23
- Max. transferable engine torque [Nm]: 550
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Product line: Performance
- Condition: New
Details
free deliveryArticle № : 881861 999878 SACHS PERFORMANCE 881861 999878
Car parts maker: SACHS PERFORMANCE(1)In stock
£ 369,88incl. 20% VAT - Diameter [mm]:
-
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info: with flywheel screws
- Flywheel Profile: with sprocket
- Condition: New
Details
free deliveryArticle № : 3021 600 288 SACHS 3021 600 288
Car parts maker: SACHSIn stock
£ 171,58incl. 20% VAT -
- Supplementary Article / Supplementary Info: with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
Details
free deliveryArticle № : 600 0321 00 LuK 600 0321 00
Car parts maker: LuKIn stock
£ 420,38incl. 20% VAT -
- Diameter [mm]: 228
- Number of Teeth: 28
- Product line: ZMS Modul XTend
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Mounting Type: not pre-mounted
- only available in set:
- Condition: New
Details
free deliveryArticle № : 2290 601 059 SACHS 2290 601 059
Car parts maker: SACHSIn stock
£ 320,18incl. 20% VAT - Diameter [mm]:
-
- Number of Teeth: 28
- Product line: KIT4P - CONVERSION KIT
- Supplementary Article / Supplementary Info: with single-mass flywheel
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part:
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Details
free deliveryArticle № : 835035 VALEO 835035
Car parts maker: VALEO(5)In stock
£ 259,98incl. 20% VAT -
- Transmission Type: 6-Speed Dual-Clutch Transmission
- Clutch Type: for wet clutch
- Number of mounting bores: 10
- Supplementary Article / Supplementary Info: with pilot bearing
- Condition: New
Details
free deliveryArticle № : 415 0755 09 LuK 415 0755 09
Car parts maker: LuK(1)In stock
£ 431,78incl. 20% VAT -
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: ZMS Modul XTend plus CSC
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Mounting Type: not pre-mounted
- only available in set:
- Condition: New
Details
free deliveryArticle № : 2290 601 009 SACHS 2290 601 009
Car parts maker: SACHS(5)In stock
£ 359,48incl. 20% VAT - Diameter [mm]:
-
- Number of Teeth: 23
- Product line: FULLPACK DMF (CSC)
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- New Part:
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set:
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set:
- Condition: New
Details
free deliveryArticle № : 837397 VALEO 837397
Car parts maker: VALEO(3)In stock
£ 338,48incl. 20% VAT -
- Diameter [mm]: 220
- Number of Teeth: 28
- for components see parts list:
- Observe service information:
- Condition: New
Details
Article № : 3000 950 019 SACHS 3000 950 019
Car parts maker: SACHS(2)In stock
£ 104,51incl. 20% VAT - Diameter [mm]:
-
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: Performance
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Details
free deliveryArticle № : 883089 000034 SACHS PERFORMANCE 883089 000034
Car parts maker: SACHS PERFORMANCE(2)In stock
£ 1156,88incl. 20% VAT - Diameter [mm]:
-
Fast delivery
Shipping methods
-
