GLYCO Con rod bearing TOYOTA CELICA
reset
or
Parts catalogue: GLYCO Con rod bearing TOYOTA CELICA
TOYOTA CELICA Petrol
- GLYCO Con rod bearing TOYOTA Celica V Coupe (T180) 1.6 (AT180) 105 hp 09/1989 - 12/1993
- GLYCO Con rod bearing TOYOTA Celica I Coupe (A20) 1.6 ST (TA2, TA22) 86 hp 05/1973 - 03/1978
- GLYCO Big end bearing Toyota Celica IV Hatchback (T160) 1.6 GT 16V (AT160_) 124 hp 09/1985 - 08/1989
- GLYCO Big end bearing Toyota Celica II Coupe (A40) 1.6 ST (TA40) 86 hp 08/1977 - 07/1981
- GLYCO Rod bearing Celica I Coupe (A20) 1.6 GT (TA2, TA22) 107 hp 12/1974 - 03/1978
- GLYCO Rod bearing Celica IV Hatchback (T160) 1.6 (AT160_) 86 hp 04/1986 - 08/1989
- Celica II Hatchback (A40) 1.6 ST (TA40_) 86 hp 08/1977 - 07/1981
- Celica II Coupe (A40) 1.6 LT (TA4C) 75 hp 02/1979 - 07/1981
- Celica IV Hatchback (T160) 1.6 GTI 16V (AT160_) 125 hp 01/1988 - 12/1989
- Celica I Coupe (A20) 1.6 LT (TA22) 79 hp 05/1973 - 03/1978
- Celica IV Hatchback (T160) 1.6 GT (AT160_) 116 hp 08/1987 - 08/1989
- Celica II Coupe (A40) 1.6 ST (TA40) 90 hp 02/1979 - 07/1981
- Celica I Coupe (A20) 1.6 LT (TA2) 75 hp 02/1976 - 03/1978
- Celica III Coupe (A60) 1.6 (AA63_) 124 hp 12/1983 - 12/1985
- Celica II Coupe (A40) 1.6 GT (TA40) 110 hp 04/1980 - 07/1981
- Celica IV Saloon (T160) 1.6 (AT160_) 86 hp 04/1986 - 08/1989
- Celica IV Saloon (T160) 1.6 GT 16V (AT160_) 124 hp 04/1986 - 08/1989
- Celica Coupe (_A2_) 1.6 (TA22) 103 HP 11/1971 - 06/1976
- Celica II Coupe (A40) 1.6 GT (TA4C) 109 hp 04/1978 - 07/1981
- Celica III Hatchback (A60) 1.6 (AA63_) 124 hp 08/1983 - 07/1985
Best selling car spares from GLYCO TOYOTA CELICA
- Crankshaft bearing
- Thrust washers
Bestsellers: Rod bearing GLYCO Toyota CELICA
-
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 15,7
- to housing diameter [mm]: 47,02
- for shaft diameter from [mm]: 43,99
- Component Number: 64-715-1
- Standard Size [STD]:
- Thickness [mm]: 1,488
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-4894/4 STD GLYCO Big end bearing 01-4894/4
Car parts maker: GLYCOIn stock
£ 33,48incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Steel back with sinter-fused bronze
- Width [mm]: 19,61
- for bearing clearance from [mm]: 0,02
- to bearing clearance [mm]: 0,06
- for shaft diameter from [mm]: 51,971
- to shaft diameter [mm]: 51,987
- to housing diameter [mm]: 55,012
- Component Number: 71-3560
- Standard Size [STD]:
- Thickness [mm]: 1,449
- Condition: New
Details
Article № : 71-3560 STD GLYCO Rod bearing 71-3560
Car parts maker: GLYCOIn stock
£ 11,28incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 16
- for bearing clearance from [mm]: 0,02
- to bearing clearance [mm]: 0,07
- for housing diameter from [mm]: 45
- for shaft diameter from [mm]: 41,984
- to shaft diameter [mm]: 42
- to housing diameter [mm]: 45,016
- Standard Size [STD]:
- Thickness [mm]: 1,492
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-4990/3 STD GLYCO Connecting rod bearing 01-4990/3
Car parts maker: GLYCO(1)In stock
£ 20,78incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 13,6
- for housing diameter from [mm]: 43,02
- for shaft diameter from [mm]: 40
- Component Number: 64-735-1
- Standard Size [STD]:
- Thickness [mm]: 1,495
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-4980/3 STD GLYCO Con rod bearing 01-4980/3
Car parts maker: GLYCOIn stock
£ 24,68incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 26
- to housing diameter [mm]: 58,02
- for shaft diameter from [mm]: 54,98
- Component Number: 64-039-1
- Standard Size [STD]:
- Thickness [mm]: 1,486
- Condition: New
Details
Article № : 01-4146/4 STD GLYCO Big end bearing 01-4146/4
Car parts maker: GLYCOIn stock
£ 30,50incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Bronze coated steel back
- Width [mm]: 17,05
- for bearing clearance from [mm]: 0,03
- to bearing clearance [mm]: 0,08
- for housing diameter from [mm]: 48,665
- for shaft diameter from [mm]: 44,975
- to shaft diameter [mm]: 44,991
- to housing diameter [mm]: 48,671
- Surface: Cathodic Sputtering
- Standard Size [STD]:
- Thickness [mm]: 1,820
- Condition: New
Details
Article № : 71-3986 STD GLYCO Rod bearing 71-3986
Car parts maker: GLYCOIn stock
£ 25,38incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Steel back with sinter-fused bronze
- Width [mm]: 24,59
- for housing diameter from [mm]: 62,03
- for shaft diameter from [mm]: 58,985
- Component Number: GS70860LC
- Standard Size [STD]:
- Thickness [mm]: 1,500
- Condition: New
Details
Article № : 71-4565/4 STD GLYCO Connecting rod bearing 71-4565/4
Car parts maker: GLYCOIn stock
£ 33,58incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 15,1
- to housing diameter [mm]: 43,02
- for shaft diameter from [mm]: 39,99
- Component Number: 64-025-1
- Standard Size [STD]:
- Thickness [mm]: 1,491
- Condition: New
Details
Article № : 01-4128/4 STD GLYCO Con rod bearing 01-4128/4
Car parts maker: GLYCOIn stock
£ 25,58incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Steel back with sinter-fused bronze
- Width [mm]: 19,61
- for bearing clearance from [mm]: 0,02
- to bearing clearance [mm]: 0,06
- for shaft diameter from [mm]: 51,971
- to shaft diameter [mm]: 51,987
- to housing diameter [mm]: 55,012
- Component Number: 71-3560
- Standard Size [STD]:
- Thickness [mm]: 1,449
- Condition: New
Details
Article № : 71-3560/6 STD GLYCO Big end bearing 71-3560/6
Car parts maker: GLYCOIn stock
£ 41,28incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 13,2
- to housing diameter [mm]: 43,01
- for shaft diameter from [mm]: 40
- Component Number: 64-726-1
- Standard Size [STD]:
- Thickness [mm]: 1,492
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-4892/4 STD GLYCO Rod bearing 01-4892/4
Car parts maker: GLYCOIn stock
£ 26,88incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 15,7
- for bearing clearance from [mm]: 0,02
- to bearing clearance [mm]: 0,07
- for housing diameter from [mm]: 47
- for shaft diameter from [mm]: 43,992
- to shaft diameter [mm]: 44
- to housing diameter [mm]: 47,024
- Standard Size [STD]:
- Thickness [mm]: 1,494
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-3991/4 STD GLYCO Connecting rod bearing 01-3991/4
Car parts maker: GLYCOIn stock
£ 25,48incl. 20% VAT -
- Component Number: 64-734-1
- Standard Size [STD]:
- Condition: New
Details
Article № : 01-4893/4 STD GLYCO Con rod bearing 01-4893/4
Car parts maker: GLYCOIn stock
£ 34,18incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Steel back with sinter-fused bronze
- Width [mm]: 15,5
- Component Number: GS6061LC
- Standard Size [STD]:
- Thickness [mm]: 1,496
- Condition: New
Details
Article № : 71-4564/4 STD GLYCO Big end bearing 71-4564/4
Car parts maker: GLYCOIn stock
£ 28,38incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Bronze coated steel back
- Width [mm]: 15,65
- for housing diameter from [mm]: 47
- to housing diameter [mm]: 47,02
- for shaft diameter from [mm]: 43,993
- to shaft diameter [mm]: 44
- Component Number: 71-5141U
- Surface: Cathodic Sputtering
- Standard Size [STD]:
- Thickness [mm]: 1,490
- Condition: New
Details
Article № : 71-5141/4 STD GLYCO Rod bearing 71-5141/4
Car parts maker: GLYCOIn stock
£ 40,58incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Bronze coated steel back
- Undersize [mm]: 0,25
- Width [mm]: 15,65
- for housing diameter from [mm]: 47
- to housing diameter [mm]: 47,02
- for shaft diameter from [mm]: 43,993
- Component Number: 71-5141L, 71-5141U
- Surface: Cathodic Sputtering
- Condition: New
Details
Article № : 71-5141/4 0.25MM GLYCO Connecting rod bearing 71-5141/4
Car parts maker: GLYCOIn stock
£ 43,08incl. 20% VAT -
- Component Number: 71-3902, G-188
- Standard Size [STD]:
- Condition: New
Details
free deliveryArticle № : 71-3902/5 STD GLYCO Con rod bearing 71-3902/5
Car parts maker: GLYCOIn stock
£ 149,08incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 26
- to bearing clearance [mm]: 0,09
- to housing diameter [mm]: 56,02
- for shaft diameter from [mm]: 52,99
- Component Number: 64-037-1
- Standard Size [STD]:
- Thickness [mm]: 1,486
- Condition: New
Details
Article № : 71-4145/4 STD GLYCO Big end bearing 71-4145/4
Car parts maker: GLYCOIn stock
£ 24,78incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Width [mm]: 17,1
- to housing diameter [mm]: 43,02
- for shaft diameter from [mm]: 39,99
- Component Number: 64-043-1
- Standard Size [STD]:
- Thickness [mm]: 1,491
- Chemical Properties: Unleaded
- Condition: New
Details
Article № : 01-4117/4 STD GLYCO Rod bearing 01-4117/4
Car parts maker: GLYCOOut of Stock
£ 21,78incl. 20% VAT -
- Component Number: 64-714-1
- Standard Size [STD]:
- Condition: New
Details
Article № : 01-5041/4 STD GLYCO Connecting rod bearing 01-5041/4
Car parts maker: GLYCOOut of Stock
£ 27,68incl. 20% VAT -
- Width [mm]: 17,1
- Supplementary Article / Supplementary Info Info 2: Aluminium alloy on steel base
- Component Number: 64-043-1
- for shaft diameter from [mm]: 39,99
- to housing diameter [mm]: 43,02
- Undersize [mm]: 0,25
- Chemical Properties: Unleaded
- Condition: New
Details
Car parts maker: GLYCOOut of Stock
£ 49,68incl. 20% VAT
Con rod bearing for top TOYOTA CELICA models
Catalogue of brands:
Other spare parts from GLYCO
- GLYCO Con rod bearing
- GLYCO Crankshaft bearing
- GLYCO Thrust washers
-
Fast delivery
Shipping methods
-
4/10
(Reviews-1)
Parameters rating
Product cost
+ -Product quality
+ -Packaging quality
+ -Manufacturer
+ -Warranty
+ -Product cost
+1 -1Product quality
+1 -1Packaging quality
+1 -1Manufacturer
+1 -1Warranty
+1 -1