
SNR Car parts

SNR original products bestsellers
- Wheel bearing
- Timing belt kit
- Timing belt and water pump
- Drive shaft
- Strut mount
- Water pump
- Serpentine belt
- Timing chain
- Timing chain kit
- ABS sensor
- Crankshaft pulley
- Cv joint
- Performance brake discs
- Poly v-belt kit
- Tensioner pulley
- Drive belt tensioner

- Tensioner pulley
- Serpentine belt
- Timing belt kit
- Guide pulley
- V-belt
- Poly v-belt kit
- Timing belt and water pump
- Timing belt tensioner pulley
- Timing belt deflection pulley
- Drive belt tensioner
- Timing belt tensioner
- Timing chain
- Timing chain kit
- Crankshaft pulley
- Freewheel clutch alternator
- Cam gear
- Brake discs
- ABS sensor
- Strut mount
- Shock absorber
- Auxiliary water pump
- Water pump
- Wheel hub
- Wheel bearing
- Axle bushes
- Control arm repair kit
- Performance brake discs
- Cv joint
- Drive shaft
- Cv boot

SNR is a car bearing brand known in the whole world. At present, it belongs to the NTN-SNR group that is the European office of the Japanese NTN Corporation. SNR accounts for 30% of the total bearing production in Europe.
SNR Background
The history of the SNR brand dates back to 1916 when the bearing plant was established in Annecy, France. The founder of the company was Jacques Schmidt, a blacksmith from Switzerland. In the beginning the company’s products were known under the brand name SRO. Only in 1946 when the company was acquired by the French group Renault the components started being made under the brand SNR (Société Nouvelle de Roulements). By 1956 the plant had begun to work to full capacity: every day 42000 bearings came off the assembly lines.
At present, the company’s production centres are located worldwide: in France, Germany, Brazil, Romania, China, the USA, Italy and Japan. Since 2008, it has been a part of the NTN-SNR group. Since 2010, the common venture has had the name NTN-SNR Roulements. The company is the largest European supplier of original bearings for the assembly lines of car makers, and it also manufactures car parts for aftermarket. You can buy SNR car parts online for most car brands in our online store.
SNR Car parts:
- Hub bearings. This category consists of several series:
- Single row. They are considered to be bearings of the zero generation. They can be tapered and roller-type. In mass production they are use less and less frequently as they require some adjustment, lubrication and outer seal installation.
- HUB-I. Feature simple installation, do not require using any additional tools for tensioning. As rolling elements in the construction both balls and rollers can be used. In order to protect the inner elements from dirt and prevent lubricant from leaking out, seals can be optionally used.
- HUB-II. These are fitted with a bore flange for attaching the bearing to a brake disc or wheel hub, allowing to reduce the size of the hub assembly. As a rule, in the construction of these components balls are used and the hub itself is made in the form of a solid cartridge and therefore is well protected from the impact of the environment.
- HUB-III. They are fitted with two bore flanges to be attached both to a brake disc and to a wheel hub. High resistance to contamination. Feature easy mounting, centring and maintenance. HUB series bearings of all the three generations can be integrated with ASB sensors – these are tiny sensors that measure the wheel speed and send the data to control units of the corresponding systems.
- HUB-IV. Differs from the previous series – HUB-III–in having installed CVUJ. Being lighter and more compact, they have a more rigid design. One of the advantages is their high serviceability.
- Gearbox bearings. Go through thermal and chemical processing that increases their resistance to abrasive particle, lubrication impact and peak load impacts. Besides, high quality transmission seals are also produced under the brand SNR.
- Suspension bearings. This category includes a wide product range. For MacPherson strut alone, the following SNR products are offered:
- 134 slewing bearings kits for the KB struts.
- 58 kinds of slewing bearings for the M struts.
- 19 repair kits for KS suspension arms.
- Clutch bearings.
- Engine bearings.
- Alternator bearings.
- Starter bearings.
- Accessory drive belt rollers.
SNR Car parts at the best price
-
- Diameter [mm]: 69
- Width 1 [mm]: 26
- Condition: New
DetailsArticle № : GA351.09 SNR Deflection / Guide Pulley, v-ribbed belt
Car parts maker: SNRIn stock
£ 9,38incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 4
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OP 3231
- Condition: New
DetailsArticle № : KB655.28 SNR Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 18,58incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 4
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OP 3231
- Condition: New
DetailsArticle № : KB659.23 SNR Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 18,78incl. 20% VAT -
- Diameter [mm]: 39
- Inner Diameter 2 [mm]: 17
- Width 1 [mm]: 13
- Condition: New
DetailsArticle № : R153.07 SNR Wheel bearing kit 39 mm
Car parts maker: SNRIn stock
£ 11,28incl. 20% VAT -
- Number of Teeth: 111
- Number of belts: 1
- Width 1 [mm]: 17
- Number of track rollers: 1
- Condition: New
DetailsArticle № : KDP453.020 SNR Water pump and timing belt kit Number of Teeth: 111, Width 1: 17 mm
Car parts maker: SNRIn stock
£ 55,18incl. 20% VAT -
- Number of Teeth: 104
- Number of belts: 1
- Width 1 [mm]: 17
- Number of track rollers: 1
- Condition: New
DetailsArticle № : KDP459.060 SNR Water pump and timing belt kit Number of Teeth: 104, Width 1: 17 mm
Car parts maker: SNRIn stock
£ 47,58incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 5
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OM 1112, Hazet : 4915/15
- Condition: New
DetailsArticle № : KB659.36 SNR Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 19,38incl. 20% VAT -
- Inner Diameter 2 [mm]: 60
- Diameter [mm]: 124
- Width 1 [mm]: 51
- Article number of the recommended special tool: Hazet : 4910/13, Hazet : 4915/15
- Condition: New
DetailsArticle № : M259.12 SNR Anti-Friction Bearing, suspension strut support mounting
Car parts maker: SNRIn stock
£ 11,18incl. 20% VAT -
- Number of Parts [parts]: 2
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OM 1112
- Condition: New
DetailsArticle № : KB677.05 SNR Repair kit, suspension strut
Car parts maker: SNRIn stock
£ 26,38incl. 20% VAT -
- Number of Teeth: 125
- Number of belts: 1
- Width 1 [mm]: 15
- Number of track rollers: 1
- Condition: New
DetailsArticle № : KDP458.350 SNR Water pump and timing belt kit Number of Teeth: 125, Width 1: 15 mm
Car parts maker: SNRIn stock
£ 44,98incl. 20% VAT -
- Fitting Position: Rear Axle Right, Rear Axle Left
- Length [mm]:
804
- External Toothing wheel side: 31
- External Toothing differential side: 26
- New Part:
- Condition: New
Detailsfree deliveryArticle № : DK80.002 SNR Drive shaft Rear Axle Right, Rear Axle Left, 804mm
Car parts maker: SNRIn stock
£ 161,58incl. 20% VAT -
- Fitting Position:
Front Axle Right
- Height [mm]: 61
- Length [mm]:
148
- Width 1 [mm]: 133
- Condition: New
DetailsArticle № : KBLF41801 SNR Top strut mount Front Axle Right
Car parts maker: SNRIn stock
£ 21,78incl. 20% VAT - Fitting Position:
-
- Number of Teeth: 154
- Number of belts: 1
- Width 1 [mm]: 30
- Number of track rollers: 2
- Condition: New
Detailsfree deliveryArticle № : KDP455.360 SNR Water pump and timing belt kit Number of Teeth: 154, Width 1: 30 mm
Car parts maker: SNRIn stock
£ 151,88incl. 20% VAT -
- Fitting Position:
Front Axle Right
- Length [mm]:
921
- External Toothing wheel side: 36
- External Toothing differential side: 26
- Wheel-sided joint diameter [mm]: 97
- Transmission-sided joint diameter [mm]: 88,5
- Sealing Ring Diameter [mm]: 56,3
- Thread Size: M10
- New Part:
- Condition: New
DetailsArticle № : DK52.006 SNR Drive shaft Front Axle Right, 921mm
Car parts maker: SNRIn stock
£ 126,38incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Front Axle
- Length [mm]:
624
- External Toothing wheel side: 38
- Wheel-sided joint diameter [mm]: 113,5
- Transmission-sided joint diameter [mm]: 97,5
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1,5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- New Part:
- Number of pins: 45
- Condition: New
DetailsArticle № : DK54.029 SNR Drive shaft Front Axle, 624mm, with rubber mount
Car parts maker: SNRIn stock
£ 128,78incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Condition: New
DetailsArticle № : SA95013.06 SNR Shock absorber Rear Axle, Gas Pressure, Telescopic Shock Absorber
Car parts maker: SNRIn stock
£ 45,28incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Condition: New
DetailsArticle № : SA95113.03 SNR Shock absorber Rear Axle, Gas Pressure, Telescopic Shock Absorber
Car parts maker: SNRIn stock
£ 40,08incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
DetailsArticle № : SA95311.01 SNR Shock absorber Rear Axle, Gas Pressure, Telescopic Shock Absorber
Car parts maker: SNRIn stock
£ 41,88incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Condition: New
DetailsArticle № : SA95713.01 SNR Shock absorber Rear Axle, Gas Pressure, Telescopic Shock Absorber
Car parts maker: SNRIn stock
£ 40,08incl. 20% VAT - Fitting Position:
-
- Fitting Position:
Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Condition: New
DetailsArticle № : SA95913.10 SNR Shock absorber Rear Axle, Gas Pressure, Telescopic Shock Absorber
Car parts maker: SNRIn stock
£ 42,08incl. 20% VAT - Fitting Position:
-
- Number of ribs: 6
- Width 1 [mm]: 48
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Diameter [mm]: 192
- Article number of the recommended special tool: Hazet : 1789 N-1
- Condition: New
Detailsfree deliveryArticle № : DPF357.01K1 Crankshaft pulley Ø: 192mm, Number of ribs: 6, with rubber mount
Car parts maker: SNRIn stock
£ 204,44incl. 20% VAT -
- Fitting Position: Front Axle Left
- Height [mm]: 62
- Length [mm]: 150
- Width 1 [mm]: 133
- Condition: New
DetailsArticle № : KBLF41802 Top strut mount Front Axle Left
Car parts maker: SNRIn stock
£ 21,28incl. 20% VAT -
- Fitting Position: Front Axle Right, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Diameter [mm]: 72
- Number of Holes: 5
- Outer Diameter 2 [mm]: 127
- Tightening Torque [Nm]: 50
- Rotation angle [°]: 90
- Condition: New
DetailsArticle № : R157.32 Wheel bearing kit Front Axle Right, Front Axle Left, with rubber mount, 72 mm
Car parts maker: SNRIn stock
£ 44,98incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 4
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OM 1112, Hazet : 4915/15
- Condition: New
DetailsArticle № : KB655.07 Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 18,78incl. 20% VAT -
- Height [mm]: 35, 35,7
- Length [mm]: 165
- Width 1 [mm]: 133
- Condition: New
DetailsArticle № : KBLF41791 Top strut mount
Car parts maker: SNRIn stock
£ 24,18incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with integrated magnetic sensor ring
- Number of Holes: 4
- Number of pins: 48
- Condition: New
DetailsArticle № : R155.84 Wheel bearing kit with rubber mount, with integrated magnetic sensor ring
Car parts maker: SNRIn stock
£ 70,08incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 5
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OP 3231
- Condition: New
DetailsArticle № : KB674.03 Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 47,28incl. 20% VAT -
- Fitting Position: Front Axle Right, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 3
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OM 1112, Hazet : 4915/15
- Condition: New
DetailsArticle № : KB651.23 Repair kit, suspension strut Front Axle Right, Front Axle Left, with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 34,28incl. 20% VAT -
- Fitting Position: Front Axle Left
- Length [mm]: 479,5
- External Toothing wheel side: 36
- Wheel-sided joint diameter [mm]: 105
- Transmission-sided joint diameter [mm]: 89
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1,5
- New Part:
- Condition: New
DetailsArticle № : DK54.021 Drive shaft Front Axle Left, 479,5mm
Car parts maker: SNRIn stock
£ 107,08incl. 20% VAT -
- Number of Teeth: 123
- Number of belts: 1
- Width 1 [mm]: 27
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw
- Number of track rollers: 1
- Condition: New
DetailsArticle № : KDP455.580 Water pump and timing belt kit with rubber mount, with screw, Number of Teeth: 123, Width 1: 27 mm
Car parts maker: SNRIn stock
£ 74,98incl. 20% VAT -
- Number of Teeth: 89
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 2
- Condition: New
DetailsArticle № : KDP455.620 Water pump and timing belt kit Number of Teeth: 89, Width 1: 25 mm
Car parts maker: SNRIn stock
£ 120,08incl. 20% VAT -
- Width 1 [mm]: 15
- Diameter [mm]: 52
- Inner Diameter 2 [mm]: 16
- Article number of the recommended special tool: Hazet : 4910/13, Hazet : 4915/15
- Condition: New
DetailsArticle № : M255.06 Repair kit, suspension strut
Car parts maker: SNRIn stock
£ 11,48incl. 20% VAT -
- Diameter [mm]: 90
- Width 1 [mm]: 14
- Condition: New
DetailsArticle № : GA354.14 Tensioner pulley
Car parts maker: SNRIn stock
£ 42,18incl. 20% VAT -
- Number of Teeth: 152
- Number of belts: 1
- Width 1 [mm]: 30
- Number of track rollers: 2
- Condition: New
DetailsArticle № : KDP455.350 Water pump and timing belt kit Number of Teeth: 152, Width 1: 30 mm
Car parts maker: SNRIn stock
£ 131,85incl. 20% VAT -
- Fitting Position: Front Axle Right
- Length [mm]: 755
- External Toothing wheel side: 36
- Wheel-sided joint diameter [mm]: 105
- Transmission-sided joint diameter [mm]: 89
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1,5
- New Part:
- Condition: New
DetailsArticle № : DK54.016 Drive shaft Front Axle Right, 755mm
Car parts maker: SNRIn stock
£ 127,08incl. 20% VAT -
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with screw set
- Number of Parts [parts]: 4
- Article number of the recommended special tool: Clas : OM1112, Clas : OP3231, Clas : OP 3231
- Condition: New
DetailsArticle № : KB659.33 Repair kit, suspension strut with rubber mount, with screw set
Car parts maker: SNRIn stock
£ 23,38incl. 20% VAT -
- Fitting Position: Front Axle Left
- Length [mm]: 582
- External Toothing wheel side: 36
- External Toothing differential side: 26
- Wheel-sided joint diameter [mm]: 88
- Transmission-sided joint diameter [mm]: 91,5
- Sealing Ring Diameter [mm]: 56
- Thread Size: M10
- New Part:
- Condition: New
DetailsArticle № : DK52.005 Drive shaft Front Axle Left, 582mm
Car parts maker: SNRIn stock
£ 101,58incl. 20% VAT -
- Number of ribs: 6
- Length [mm]: 2263
- Number of belts: 1
- Number of track rollers: 3
- Condition: New
DetailsArticle № : KA851.01 V-Ribbed Belt Set
Car parts maker: SNRIn stock
£ 64,78incl. 20% VAT -
- Number of Teeth: 144
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 2
- Condition: New
DetailsArticle № : KDP459.330 Water pump and timing belt kit Number of Teeth: 144, Width 1: 25 mm
Car parts maker: SNRIn stock
£ 83,48incl. 20% VAT -
- Number of Teeth: 141
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 2
- Condition: New
DetailsArticle № : KDP452.360 Water pump and timing belt kit Number of Teeth: 141, Width 1: 25 mm
Car parts maker: SNRIn stock
£ 108,28incl. 20% VAT
7.72/10
(Reviews-1091)
Parameters rating
Product cost
+926 7-Product quality
+807 8-Packaging quality
+317 11-Manufacturer
+428 19-Warranty
+600 16-Product cost
+1 -1Product quality
+1 -1Packaging quality
+1 -1Manufacturer
+1 -1Warranty
+1 -1