
Wing AUDI A5 front and rear

Wing AUDI A5 models at best prices
- A5 B8
- Audi A5 B8 Wing 06/2007 - 01/2017 Car body type: Coupe
- Audi A5 B8 Sportback Fender 09/2009 - 01/2017 Car body type: Hatchback
- A5 B8 Convertible 8F7 Wing 03/2009 - 01/2017 Car body type: Convertible
- A5 B9
- Audi A5 B9 Sportback Wing 09/2016 - ... Car body type: Hatchback
- Audi A5 F53 Fender 06/2016 - ... Car body type: Coupe
- A5 B9 Convertible F57 Wing 11/2016 - ... Car body type: Convertible
Wing AUDI A5: useful information
-
Parts recommended for simultaneous replacement as part of a service kit
- Bumper
- Trim / Protective Strip Set
- Bonnet
- Wheel arch liner
- Headlight
- Mudguard
- Trim / Protective Strip, mudguard
- Radiator Grille
- Bumper grill
- Side indicator
- Cover, bumper
- Fog Light
- Minimum price £ 170,00
- Maximum price £ 242,00
Catalogue of manufacturers: Wings AUDI A5
Wings AUDI A5 and other car parts Body
What material are wings for Audi A5 made from?
Front components are made from either aluminium or steel. The rear ones can only be steel and are integral with the car body.
Aluminium ones are light, corrosion-resistant but cost a lot and are difficult to repair. They aren’t very elastic and in case of mechanical impact they crack. Steel components are inexpensive, good at absorbing impacts but they are heavy and rust with time.
Can I install this component on my car myself?
The replacement of front wings is easy and even motorists with no experience in repair works can do it. It is necessary to remove the bumper, wheel arch liner and to dismantle or turn back the doorsill to get access to the fasteners of the component.
The removal of the rear element is more difficult as it involves cutting the car body and then welding. It is better to have professionals to perform the work.
Which is better: to buy a new wing for Audi A5 or restore the old one?
It all depends on the nature and degree of damage, and the amount and cost of repair works. Small chips and scratches can be eliminated with the help of abrasive polishing or with a scratch remover pen. More severe defects require sanding and painting of the damaged area.
Small rust spots are usually sanded and treated with a rust converter, then primer and paint are applied.
Dented rear elements are restored by flattening. The front components are usually replaced since aluminium loses its elasticity and becomes brittle as a result of this kind of work.
Do all the parts for this model have the same colour?
New components are sold unpainted and are usually grey. After the installation, they are painted the car body colour.
Used elements can be of different colours. However, due to their limited choice, it isn’t always possible to find the component of the required colour.
Is it necessary to buy both wings for Audi A5 or is it possible to replace just one?
The component should be replaced if there is severe damage, therefore you may install only one component. However, if both of them are deformed, it is more convenient and cost-efficient to buy them together.