Back to catalogue
Lambda sensor Ford Ranger TKE 2.5 i 4x4 166 hp Petrol
Info: FORD Ranger Mk3 (TKE) 2.5 i 4x4
- Manuf. year (from - to): 11.2011-...
- Power [kW]: 122
- Power [hp]: 166
- Cylinder capacity (cc): 2488
- Engine type: Petrol Engine
- Car body type: Pickup
- Engine code: GBVAK
- Manufacturer's model designation: TKE
- Catalytic Converter: ...
- Fuel Supply: Direct Injection
- Engine Design: Straight
- Exhaust Emission Norm: ...
- Transmission: ...
- Model year from: ...
- Model year to: ...
-
Article №: 3922L092310/10 Based on over 4 customer ratingsIn stock£ 29,18incl. 20% VAT,
excl. delivery costs- Thread Size:
M18x1,5 - Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits:
4 - Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Please rate this productIn stock£ 31,53incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
10/10 Based on over 25 customer ratingsIn stock£ 33,38incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: SKLS-0141083Please rate this productIn stock£ 29,18incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
10/10 Based on over 6 customer ratingsIn stock£ 33,38incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 60210/10 Based on over 24 customer ratingsIn stock£ 41,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 08997 Oxygen SensorArticle №: 08997Please rate this productIn stock£ 42,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Number of pins:
4 - Length [mm]:
![Lambda sensor 650 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
650 - Condition: Brand new
Show OEM numbers -
Article №: 570112APlease rate this productIn stock£ 46,97incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Alternatively:
- Condition: Brand new
Show OEM numbers -
Article №: 81601Please rate this productIn stock£ 47,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Conductor Number:
636 - for OE number: 36531P28A01
- Quality: Zr High Impedance, OE EQUIVALENT
- Resistance [Ohm]: 16
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 010 296Please rate this productIn stock£ 49,78incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Exhaust System: after catalytic converter
- Overall Length [mm]: 310
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986602
- Condition: Brand new
Show OEM numbers -
Article №: 77782Please rate this productIn stock£ 53,78incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of pins: 4
- Length [mm]: 300
- Condition: Brand new
Show OEM numbers -
Article №: 59-0014Please rate this productIn stock£ 56,78incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 010 298Please rate this productIn stock£ 58,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Overall Length [mm]: 373
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986602
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 01759 Regulating ProbeArticle №: 01759Please rate this productIn stock£ 58,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: Brand new
Show OEM numbers -
Article №: 1.998.367Please rate this productIn stock£ 58,78incl. 20% VAT,
excl. delivery costs- Supplementary Info: Made in Italy - OE Equivalent
- TecDoc Engine Number: GBVAF, GBVAL, GBVAK
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 300
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.235
- Condition: Brand new
Show OEM numbers -
Article №: 81937EPlease rate this productIn stock£ 59,68incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Cable Length [mm]: 240
- Number of pins: 4
- for OE number: 1734824
- Quality: OE EQUIVALENT
- Condition: Brand new
Show OEM numbers -
Article №: 10.8235Please rate this productIn stock£ 66,08incl. 20% VAT,
excl. delivery costs- Supplementary Info: Made in Italy - OE Equivalent
- TecDoc Engine Number: GBVAF, GBVAL, GBVAK
- Fitting Position: after catalytic converter
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 250, 540, 690, 915
- Length [mm]: 300, 325, 450, 540, 600, 400, 480, 690
- Number of circuits: 4
- Conductor Number: 4
- Version: 2
- Colour: black, grey, brown
- Number of pins: 4
- Condition: Brand new
Show OEM numbers -
Article №: 1.998.235Please rate this productIn stock£ 68,88incl. 20% VAT,
excl. delivery costs- Supplementary Info: Made in Italy - OE Equivalent
- TecDoc Engine Number: GBVAF, GBVAL, GBVAK
- Fitting Position: after catalytic converter
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 250, 690, 915, 540
- Length [mm]: 650, 400, 480, 690, 300, 325, 540, 600
- Number of circuits: 4
- Conductor Number: 4
- Version: 2
- Colour: brown, grey, black
- Number of pins: 4
- Condition: Brand new
Show OEM numbers -
Article №: 10 012 0090Please rate this productIn stock£ 81,78incl. 20% VAT,
excl. delivery costs- Weight [g]: 120
- Condition: Brand new
-
Article №: YT-175310/10 Based on over 7 customer ratingsIn stock£ 4,18incl. 20% VAT,
excl. delivery costs- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
- Condition: Brand new
Oxygen sensor for Ford RANGER (TKE) 2.5 i 4x4 – the best products as chosen by customers
Customers also shopped for
Engine
RANGER (TKE) 2.5 i 4x4 Petrol 166 hp / 122 kW
Bestsellers
FORD RANGER (TKE) 2.5i 4x4
Lambda sensor
For other models of FORD
-
Fast delivery
Shipping methods
-
