Back to catalogue
Lambda sensor Mazda 5 cr19 2.0 CD 143 hp Diesel
Info: MAZDA 5 (CR19) 2.0 CD (CR19)
- Manuf. year (from - to): 02.2005-05.2010
- Power [kW]: 105
- Power [hp]: 143
- Cylinder capacity (cc): 1998
- Engine type: Diesel
- Car body type: MPV
- Engine code: RF7J
- Manufacturer's model designation: CR19
- Catalytic Converter: ...
- Fuel Supply: Direct Injection
- Engine Design: Straight
- Exhaust Emission Norm: Euro 4
- Transmission: ...
- Model year from: ...
- Model year to: ...
-
Article №: 3922L0706Please rate this productIn stock£ 31,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Rear
- Construction Year to: 11/2006
- Exhaust System: before catalytic converter
- Thread Size:
M18x1,5 - Oxygen Sensor: Heated
- Cable Length [mm]: 356
- Number of pins:
4 - Number of circuits:
4 - Connector Shape: rectangular
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 3922L0497P0.0/10 Based on over 1 customer ratingsIn stock£ 59,87incl. 20% VAT,
excl. delivery costs- Construction Year to: 12/2006
- Construction Year from: 12/2005
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 675
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: rectangular
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 3922L0175Please rate this productIn stock£ 66,08incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 795
- Conductor Number:
4 - Supplementary Article / Supplementary Info: with squeeze connector, with cable tie
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Article №: 3922L1127Please rate this productIn stock£ 87,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 960
- Number of pins: 4
- Number of circuits: 4
- Weight [g]: 143
- Condition: Brand new
Show OEM numbers -
Lambda sensor WAGNER LBS00534 without clip, before catalytic converter, M18X1.5mm, Regulating Probe, 4, angularArticle №: LBS00534Please rate this productIn stock£ 32,98incl. 20% VAT,
excl. delivery costs- Fitting Position: before catalytic converter
- Construction Year from: 12/2006
- Thread Size: M18X1.5mm
- Oxygen Sensor: Regulating Probe
- Cable Length [mm]: 375
- Overall Length [mm]: 490
- Length [mm]:
![Lambda sensor 460 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
460 - Number of circuits: 4
- Conductor Number: 4
- Recommended change interval [km]: 80000
- Weight [kg]: 0,12
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: black
- Connector Shape: angular
- Net weight [kg]: 0,09
- Number of pins: 4
- Line insulation design: with silicone insulation
- Condition: Brand new
Show OEM numbers -
Article №: 33 10 3090Please rate this productIn stock£ 43,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0,097
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 09SKV735Please rate this productIn stock£ 46,38incl. 20% VAT,
excl. delivery costs- Construction Year from: 12/2005
- Construction Year to: 12/2006
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 815
- Number of circuits: 4
- Weight [kg]: 0,14
- Voltage [V]:
![Lambda sensor 12 Voltage [V]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/6.png)
12 - Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: ADBP700001Please rate this productIn stock£ 53,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0,097
- Spanner Size: 22
- Observe service information:
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 09SKV740Please rate this productIn stock£ 56,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Construction Year from: 12/2006
- Length [mm]: 595
- Number of circuits: 4
- Weight [kg]: 0,13
- Voltage [V]: 12
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: EOS-4530Please rate this productIn stock£ 60,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Front, before catalytic converter
- Construction Year to: 11/2005
- Construction Year from: 01/2007
- Thread Size: M18x1,5
- Oxygen Sensor: Heated, Planar probe
- Number of pins: 4
- Length [mm]: 800
- Condition: Brand new
Show OEM numbers -
Article №: 8845 50005Please rate this productIn stock£ 61,58incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Length [mm]: 460
- Number of circuits: 4
- Colour:
black - Number of pins: 4
- Condition: Brand new
Show OEM numbers -
Article №: SKLS-0140101Please rate this productIn stock£ 66,08incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 795
- Conductor Number: 4
- Supplementary Article / Supplementary Info: with squeeze connector, with cable tie
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Article №: ESL-MZ-001Please rate this productIn stock£ 66,88incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, after catalytic converter
- Fabrication Number: ESL-MZ-001
- Condition: Brand new
Show OEM numbers -
Article №: ENT600028Please rate this productIn stock£ 72,18incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Cable Length [mm]: 960
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 72,68incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: RF7J
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 460
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers -
Article №: 10 012 0090Please rate this productIn stock£ 81,78incl. 20% VAT,
excl. delivery costs- Weight [g]: 120
- Condition: Brand new
-
Please rate this productIn stock£ 99,38incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: RF7J
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 750
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers -
Article №: DOX-05398.0/10 Based on over 2 customer ratingsIn stock£ 129,88incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Diagnostic Probe
- for OE number: RF7N188G1
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Broadband oxygen sensor
- Cable Length [mm]: 960
- Number of pins: 4
- for OE number: RF8G188G1B
- Quality: OE
- Weight [g]: 143
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 176
- Condition: Brand new
Show OEM numbers -
Free deliveryArticle №: 75612Please rate this productIn stock£ 131,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- for OE number: RF7N188G1
- Number of pins: 4
- Length [mm]: 1000
- Condition: Brand new
Show OEM numbers -
Free deliveryPlease rate this productIn stock£ 158,78incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: RF7J
- for OE number: RF7N188G1
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Oxygen Sensor: Heated
- Length [mm]: 1000
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers
Oxygen sensor for Mazda 5 (CR19) 2.0 CD (CR19) – the best products as chosen by customers
Customers also shopped for
Engine
5 (CR19) 2.0 CD (CR19) Diesel 143 hp / 105 kW
- EGR valve Mazda 5 cr19 2.0 CD
- Catalytic converter Mazda 5 cr19 2.0 CD
- Diesel particulate filter (DPF) Mazda 5 cr19 2.0 CD
- Exhaust silencer Mazda 5 cr19 2.0 CD
- EGR cooler Mazda 5 cr19 2.0 CD
- Exhaust pressure sensor (DPF) Mazda 5 cr19 2.0 CD
- Exhaust gas temperature sensor Mazda 5 cr19 2.0 CD
- Mounting kit, exhaust system Mazda 5 cr19 2.0 CD
- Exhaust pipe Mazda 5 cr19 2.0 CD
- Flex pipe Mazda 5 cr19 2.0 CD
Bestsellers
MAZDA 5 (CR19) 2.0 CD (CR19)
Lambda sensor
For other models of MAZDA
-
Fast delivery
Shipping methods
-
