Back to catalogue
Lambda sensor Mitsubishi Outlander 1 2.4 4WD 162 hp Petrol
-
Article №: ES20529-12B1Please rate this productIn stock£ 51,08incl. 20% VAT,
excl. delivery costs- Fitting Position: Left
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Fitting Position: Left Front, before catalytic converter
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 338
- Condition: Brand new
Show OEM numbers -
Article №: 96612Please rate this productIn stock£ 53,68incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 4G69
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter, Left Front, Right Front
- Oxygen Sensor: Heated
- Length [mm]:
![Lambda sensor 950 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
950 - Number of circuits:
4 - Condition: Brand new
Show OEM numbers -
Article №: EOS-5558Please rate this productIn stock£ 54,08incl. 20% VAT,
excl. delivery costs- Thread Size:
M18x1,5 - Oxygen Sensor: Heated, Planar probe
- Fitting Position: Right Front, before catalytic converter
- Number of pins:
4 - Length [mm]: 460
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Article №: 97059Please rate this productIn stock£ 55,48incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 4G69
- Oxygen Sensor: Regulating Probe
- Length [mm]: 335
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers -
Article №: 09SKV750Please rate this productIn stock£ 58,98incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 4G69
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Regulating Probe
- Length [mm]: 335
- Number of circuits: 4
- Weight [kg]: 0,12
- Voltage [V]:
![Lambda sensor 12 Voltage [V]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/6.png)
12 - Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: EOS-5522Please rate this productIn stock£ 58,98incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated, Planar probe
- Fitting Position: Left Front, before catalytic converter
- Number of pins: 4
- Length [mm]: 460
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Lambda sensor OSSCA 01759 Regulating ProbeArticle №: 01759Please rate this productIn stock£ 59,18incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: Brand new
Show OEM numbers -
Article №: V99-76-000110/10 Based on over 1 customer ratingsIn stock£ 61,88incl. 20% VAT,
excl. delivery costs- Supplementary Info: EXPERT KITS +
- TecDoc Engine Number: 4G69
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Finger probe, Heated, Thread pre-greased
- Fitting Position: after catalytic converter
- Cable Length [mm]: 210
- Number of pins: 4
- Length [mm]: 350
- Number of circuits: 4
- for OE number: V99760001
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Lambda sensor goCORE GCC9220005 with squeeze connector, with fastening/mounting material, without plug, Universal, after catalytic converter, M18x1,5, Diagnostic Probe, Heated, 4Article №: GCC9220005Please rate this productIn stock£ 65,25incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: V99-76-000210/10 Based on over 1 customer ratingsIn stock£ 66,78incl. 20% VAT,
excl. delivery costs- Supplementary Info: EXPERT KITS +
- Construction Year from: 10/2003
- Fitting Position: Right, after catalytic converter
- Oxygen Sensor: Planar probe, Heated, Thread pre-greased
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0,09
- Supplementary Article / Supplementary Info Info 2: without plug
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Condition: Brand new
Show OEM numbers -
Article №: ADC47054Please rate this productIn stock£ 72,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Fitting Position: Right, Lower
- Cable Length [mm]: 800
- Number of circuits: 4
- Weight [kg]: 0,150
- for OE number: MN176515
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0314Please rate this productIn stock£ 74,28incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left
- for OE number: MN153038
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Thread pre-greased
- Cable Length [mm]: 950
- Number of pins: 4
- for OE number: MN153037
- Quality: OE
- Weight [g]: 120
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 153
- Condition: Brand new
Show OEM numbers -
Article №: ADC47034Please rate this productIn stock£ 76,68incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Fitting Position: Left, Exhaust Manifold
- Weight [kg]: 0,130
- for OE number: MN153036
- Observe service information:
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 10 012 0090Please rate this productIn stock£ 76,78incl. 20% VAT,
excl. delivery costs- Weight [g]: 120
- Condition: Brand new
-
Article №: ESL-AU-002Please rate this productIn stock£ 76,88incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position:
before catalytic converter - Number of circuits: 5
- Fabrication Number: ESL-AU-002
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 651Please rate this productIn stock£ 80,68incl. 20% VAT,
excl. delivery costs- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Overall Length [mm]: 1010
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986602
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0335Please rate this productIn stock£ 83,68incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left
- Exhaust System: for pre-catalytic converter
- for OE number: MN153036
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Thread pre-greased
- Cable Length [mm]: 580
- Number of pins: 4
- for OE number: MD369189
- Quality: OE
- Weight [g]: 97
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 130
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0349Please rate this productIn stock£ 83,88incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Thread pre-greased
- Cable Length [mm]: 330
- Number of pins: 4
- for OE number: MN153035
- Quality: OE
- Weight [g]: 84
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 117
- Condition: Brand new
Show OEM numbers -
Article №: EOS-5554Please rate this productIn stock£ 84,58incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated, Planar probe
- Fitting Position: Right Front, after catalytic converter
- Number of pins: 4
- Length [mm]: 950
- Condition: Brand new
Show OEM numbers - Thread Size:
-
Article №: 1.998.608Please rate this productIn stock£ 111,28incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 4G69
- Fitting Position: Left Front, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 720
- Number of circuits: 4
- Conductor Number:
4 - Available as universal article as well, see article no.: 1.998.235
- Condition: Brand new
Show OEM numbers
Oxygen sensor for Mitsubishi OUTLANDER I (CU_W) 2.4 4WD (CU5W) – the best products as chosen by customers
Customers also shopped for
Engine
OUTLANDER I (CU_W) 2.4 4WD (CU5W) Petrol 162 hp / 119 kW
- EGR valve Mitsubishi Outlander 1 2.4 4WD
- Catalytic converter Mitsubishi Outlander 1 2.4 4WD
- Diesel particulate filter (DPF) Mitsubishi Outlander 1 2.4 4WD
- Exhaust silencer Mitsubishi Outlander 1 2.4 4WD
- EGR cooler Mitsubishi Outlander 1 2.4 4WD
- Exhaust pressure sensor (DPF) Mitsubishi Outlander 1 2.4 4WD
- Exhaust gas temperature sensor Mitsubishi Outlander 1 2.4 4WD
- Mounting kit, exhaust system Mitsubishi Outlander 1 2.4 4WD
- Exhaust pipe Mitsubishi Outlander 1 2.4 4WD
- Exhaust manifold gasket Mitsubishi Outlander 1 2.4 4WD
Bestsellers
MITSUBISHI OUTLANDER I (CU_W) 2.4 4WD (CU5W)
Lambda sensor
For other models of MITSUBISHI
-
Fast delivery
Shipping methods
-
