Back to catalogue
Cv boot Sunny B11 1.5 75 hp Petrol
Info: NISSAN Sunny Saloon (B11) 1.5
- Manuf. year (from - to): 03.1982-10.1986
- Power [kW]: 55
- Power [hp]: 75
- Cylinder capacity (cc): 1488
- Engine type: Petrol Engine
- Car body type: Saloon
- Drive: Front Wheel Drive
- Manufacturer's model designation: B11
- Brake type: ...
- Brake system: Hydraulic
- Engine Design: Straight
- Engine Cooling: Water-cooled
- Engine Management: Timing Belt
- Model year from: ...
- Model year to: ...
-
8.0/10 Based on over 1 customer ratingsIn stock£ 15,78incl. 20% VAT,
excl. delivery costs- Diameter [mm]: 27, 75, 92, 100, 108, 116
- Material: Rubber
- Fitting Position: Front Axle, Rear Axle
- Height [mm]: 151
- Weight [kg]: 0,23
- Supplementary Article / Supplementary Info Info 2: with clamps
- Observe service information:
- Condition: Brand new
Show OEM numbers -
Article №: 0215-N16JPPlease rate this productIn stock£ 17,58incl. 20% VAT,
excl. delivery costs- Construction Year from: 09/1983
- for model code: B11
- Fitting Position: transmission sided
- Length [mm]:
![Cv boot 98 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
98 - Material: NBR (nitrile butadiene rubber)
- Inner Diameter 2 [mm]: 20, 72
- Quantity: 1
- Packaging width [cm]: 8,6
- Packaging height [cm]: 8,6
- Condition: Brand new
Show OEM numbers -
Article №: 0715-GVPlease rate this productIn stock£ 22,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side
- Length [mm]: 86
- Material: NBR (nitrile butadiene rubber)
- Inner Diameter 2 [mm]: 20, 72
- Quantity: 1
- Packaging width [cm]: 10,0
- Packaging height [cm]: 8,6
- for model code: B11
- Condition: Brand new
Show OEM numbers -
Article №: 515.31208.0/10 Based on over 1 customer ratingsIn stock£ 34,28incl. 20% VAT,
excl. delivery costs- Weight [g]: 360
- Temperature range from [°C]: -40
- Temperature range to [°C]: 110
- Number of Parts [parts]: 4
- Drive Shaft Diameter from [mm]: 28
- Drive Shaft Diameter up to [mm]: 40
- Joint Diameter from [mm]: 80
- Joint Diameter up to [mm]: 125
- Elongation [%]: 600
- Condition: Brand new
-
Article №: 2773010/10 Based on over 1 customer ratingsIn stock£ 11,38incl. 20% VAT,
excl. delivery costs- Length [mm]: 126
- Diameter [mm]: 21, 60, 72, 82, 83
- Material: Rubber
- Fitting Position: Front Axle, Rear Axle
- Height [mm]: 126
- Weight [kg]: 0,26
- Supplementary Article / Supplementary Info Info 2: with clamps
- Observe service information:
- Condition: Brand new
Show OEM numbers - Length [mm]:
-
Article №: VKJP 01000 SPlease rate this productIn stock£ 86,18(Price per set of 12 pieces)
incl. 20% VAT,
excl. delivery costs- Height [mm]: 146
- Number of Parts [parts]: 5
- Joint Type: Universal Joint
- Supplementary Article / Supplementary Info Info 2: with clamps
- Inner Diameter 2 [mm]: 22, 86
- Condition: Brand new
-
Article №: NE00698Please rate this productIn stock£ 107,01incl. 20% VAT,
excl. delivery costs- Diameter from [mm]: 20
- Diameter up to [mm]: 110
- Operating pressure to [bar]: 9
- Weight [kg]: 3.5
- Condition: Brand new
-
Article №: 9T0502Please rate this productIn stock£ 138,28incl. 20% VAT,
excl. delivery costs- Diameter from [mm]: 20
- Diameter up to [mm]: 110
- Operating pressure to [bar]: 9
- Weight [kg]: 3.6
- Condition: Brand new
-
Free deliveryArticle №: BSL103Please rate this productIn stock£ 168,98incl. 20% VAT,
excl. delivery costs- Diameter up to [mm]: 110
- Max. air inlet pressure to [bar]: 8
- Compressed-air Connection Thread Size [inch]: 1/4 BSP
- Pressure [psi] to: 116
- Operating Mode: pneumatic
- Condition: Brand new
-
Article №: S-JBCV0.0/10 Based on over 1 customer ratingsIn stock£ 8,58incl. 20% VAT,
excl. delivery costs- Width [mm]: 10х1
- Condition: Brand new
-
Article №: 0XAT4040Please rate this productIn stock£ 10,38incl. 20% VAT,
excl. delivery costs- Weight [kg]: 0.285
- Condition: Brand new
-
Article №: JEAE0423Please rate this productIn stock£ 27,98incl. 20% VAT,
excl. delivery costs- Overall Length [mm]: 230
- Tool handle material: Plastic
- Condition: Brand new
-
Article №: VS1636Please rate this productIn stock£ 29,28incl. 20% VAT,
excl. delivery costs- Width to [mm]: 10
- Installed thickness [mm]: <1
- Condition: Brand new
-
Article №: OK-02.0582Please rate this productIn stock£ 51,38incl. 20% VAT,
excl. delivery costs- Diameter from [mm]: 20
- Diameter up to [mm]: 120
- Operating pressure from [bar]: 6
- Operating pressure to [bar]: 8
- Quantity Unit: Piece
- Condition: Brand new
-
Article №: 0XAT4151APlease rate this productIn stock£ 88,28incl. 20% VAT,
excl. delivery costs- Weight [kg]: 2.4
- Diameter up to [mm]: 115
- Operating Pressure [bar]: 4-7
- Drive [inch]: 1/4
- Condition: Brand new
-
Article №: HT4R781Please rate this productIn stock£ 113,88incl. 20% VAT,
excl. delivery costs- Operating pressure from [bar]: 5
- Operating pressure to [bar]: 9
- Diameter from [mm]: 20
- Diameter up to [mm]: 150
- Operating Mode: pneumatic
- Condition: Brand new
-
Article №: 515.3100Please rate this productIn stock£ 114,78incl. 20% VAT,
excl. delivery costs- Material: Plastic
- Length [mm]: 450
- Tool handle type: Cold-insulating handle
- Weight [g]: 2265
- Width [mm]: 200
- Operating Pressure [bar]: 8
- Connecting thread: 1/4
- Vibration Acceleration [m/s²]: 0,37
- DIN/ISO: DIN EN ISO 28662-1
- Hose Diameter [inch]: 3/8
- Condition: Brand new
-
Mounting Tool, bellow Weber Tools WT-2110Article №: WT-2110Please rate this productIn stock£ 120,58incl. 20% VAT,
excl. delivery costs- Operating Mode: pneumatic
- Air Connection Thread: 12.91 (1/4")
- Operating Pressure [bar]: 6-8
- Operating pressure to [bar]: 9
- Length [mm]: 470
- Diameter [mm]:
![Cv boot 195 Diameter [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/200.png)
195 - Weight [kg]: 3.25
- Diameter from [mm]: 25
- Diameter up to [mm]: 15
- Condition: Brand new
-
Article №: VKN 40210/10 Based on over 6 customer ratingsIn stock£ 139,08incl. 20% VAT,
excl. delivery costs- Operating Mode: pneumatic
- Condition: Brand new
-
Free deliveryArticle №: 7MMW01Please rate this productIn stock£ 141,48incl. 20% VAT,
excl. delivery costs- Operating pressure from [bar]: 5
- Operating pressure to [bar]: 9
- Hose Diameter [inch]: 1/4" BSP
- Diameter from [mm]: 25
- Diameter up to [mm]: 110
- Weight [kg]: 2,2
- Condition: Brand new
Cv joint boot for Nissan SUNNY I (B11) 1.5 – the best products as chosen by customers
Customers also shopped for
Drive shaft and cv joint
SUNNY 1 (B11) 1.5 Petrol 75 hp / 55 kW
Bestsellers
NISSAN SUNNY 1 (B11) 1.5
Cv boot
For other models of NISSAN
-
Fast delivery
Shipping methods
-
