Back to catalogue
Suspension arm Megane 2 CC 2.0 135 hp Petrol rear and front
Info: RENAULT Megane II Coupé-Cabriolet (EM) 2.0
- Manuf. year (from - to): 09.2003-12.2009
- Power [kW]: 99
- Power [hp]: 135
- Cylinder capacity (cc): 1998
- Engine type: Petrol Engine
- Car body type: Convertible
- Drive: Front Wheel Drive
- Manufacturer's model designation: EM0/1_
- Brake type: ...
- Brake system: ...
- Engine Design: Straight
- Engine Cooling: Water-cooled
- ABS: without ABS
- Traction control system: without ARS
- Model year from: ...
- Model year to: ...
-
Article №: 273C012010/10 Based on over 6 customer ratingsIn stock£ 23,07incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Hole Spacing 1/Hole Spacing 2: 258
- Mounting points diameter [mm]: 12,2
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: Brand new
Show OEM numbers -
Suspension arm RIDEX PLUS 273C0121P Front Axle Left, Control Arm, Sheet SteelArticle №: 273C0121PPlease rate this productIn stock£ 30,57incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Hole Spacing 1/Hole Spacing 2: 258
- Mounting points diameter [mm]: 12,2
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: Brand new
Show OEM numbers -
Article №: TRC73760.0/10 Based on over 2 customer ratingsIn stock£ 23,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Lower, Front Axle Right
- Control/Trailing Arm Type: Control Arm
- paired article number: TRC7375
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Rod/Strut: Push Rod
- Condition: Brand new
Show OEM numbers -
Article №: TRC7375Please rate this productIn stock£ 23,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Lower, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- paired article number: TRC7376
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Condition: Brand new
Show OEM numbers -
Article №: NSL-NM2Please rate this productIn stock£ 25,78incl. 20% VAT,
excl. delivery costs- Fitting Position:
Front Axle Left - Weight [kg]: 0,71
- Rod/Strut: Suspension Rod
- Packaging length [cm]: 28,0
- Packaging width [cm]: 8,0
- Packaging height [cm]: 8,0
- Condition: Brand new
Show OEM numbers - Fitting Position:
-
Suspension arm ESEN SKV 69SKV199 Front Axle, Left, Control ArmArticle №: 69SKV199Please rate this productIn stock£ 28,88incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle, Left
- Control/Trailing Arm Type: Control Arm
- paired article number: 69SKV200
- Weight [kg]: 2,8
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: QSA2028SPlease rate this productIn stock£ 30,18incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Length [mm]:
![Suspension arm 421 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
421 - Cone Size [mm]: 16
- paired article number: QSA2029S
- Width [mm]: 80
- Condition: Brand new
Show OEM numbers -
Article №: M-S0758Please rate this productIn stock£ 30,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: M-S0759
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Condition: Brand new
Show OEM numbers - Fitting Position:
-
Article №: M-S0759Please rate this productIn stock£ 30,98incl. 20% VAT,
excl. delivery costs- Fitting Position:
Front Axle Right - Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: M-S0758
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Condition: Brand new
Show OEM numbers - Fitting Position:
-
Article №: QSA2027SPlease rate this productIn stock£ 31,88incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Right, Lower
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 423
- Cone Size [mm]: 18
- paired article number: QSA2026S
- Width [mm]: 78
- Condition: Brand new
Show OEM numbers -
Article №: QSA2026SPlease rate this productIn stock£ 31,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Lower
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 423
- Cone Size [mm]: 18
- paired article number: QSA2027S
- Width [mm]: 78
- Condition: Brand new
Show OEM numbers -
Article №: QSA2029SPlease rate this productIn stock£ 31,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Right, Lower
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 421
- Cone Size [mm]: 16
- paired article number: QSA2028S
- Width [mm]: 80
- Condition: Brand new
Show OEM numbers -
Article №: VKDS 326001 B8.0/10 Based on over 1 customer ratingsIn stock£ 32,18incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Right, Lower
- Control/Trailing Arm Type: Control Arm
- paired article number: VKDS 326000 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Hole Spacing 1/Hole Spacing 2: 258
- Supplementary Article / Supplementary Info: with synthetic grease
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: Brand new
Show OEM numbers -
Article №: V46-0098Please rate this productIn stock£ 32,28incl. 20% VAT,
excl. delivery costs- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: V46-0097
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting:
- Packaging width [cm]: 41,5
- Packaging height [cm]: 49
- Condition: Brand new
Show OEM numbers -
Article №: V46-00978.0/10 Based on over 2 customer ratingsIn stock£ 32,98incl. 20% VAT,
excl. delivery costs- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V46-0098
- Weight [kg]: 2,5
- Axle alignment required after fitting:
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,2
- Packaging height [cm]: 6,2
- Condition: Brand new
Show OEM numbers -
Article №: 30Z9148-OYOPlease rate this productIn stock£ 34,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Lower Front Axle, Left, outer
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Condition: Brand new
Show OEM numbers -
Article №: 30Z9149-OYOPlease rate this productIn stock£ 34,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Lower Front Axle, Right, outer
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Condition: Brand new
Show OEM numbers -
Article №: TC1367Please rate this productIn stock£ 35,08incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, outer
- paired article number: TC1368
- Fitting Position: Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 440
- Height [mm]: 70
- paired article number: TC1368
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 400
- Condition: Brand new
Show OEM numbersItem Suspension arm includes the following components:- 2 - Trailing arm / Suspension arm bush (TD533W);
- 3 - Trailing arm / Suspension arm bush (TD534W);
- 1 - Ball Joint (TC1366);
-
Article №: RH04-2005Please rate this productIn stock£ 35,88incl. 20% VAT,
excl. delivery costs- Fitting Position:
Front Axle - Control/Trailing Arm Type: Control Arm
- Length [mm]: 440
- Height [mm]: 70
- Cone Size [mm]: 18
- Thread Size: PINCH BOLT 18mm
- Width [mm]: 400
- Condition: Brand new
Show OEM numbers - Fitting Position:
-
Please rate this productIn stock£ 36,68incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 49134
- Required quantity: 1
- Condition: Brand new
Show OEM numbers
Control arm for Renault MEGANE II Coupé-Cabriolet (EM0/1_) 2.0 – the best products as chosen by customers
Customers also shopped for
Suspension
MEGANE 2 Coupe-Cabriolet (EM0/1) 2.0 Petrol 135 hp / 99 kW
- Wheel hub Megane 2 CC 2.0
- Anti-roll bar link Megane 2 CC 2.0
- Suspension kit Megane 2 CC 2.0
- Ball joint Megane 2 CC 2.0
- Suspension bushes Megane 2 CC 2.0
- Steering knuckle Megane 2 CC 2.0
- Anti-roll bar bushes Megane 2 CC 2.0
- Axle bushes Megane 2 CC 2.0
- Wheel bolts and wheel nuts Megane 2 CC 2.0
- Wheel spacers Megane 2 CC 2.0
Bestsellers
RENAULT MEGANE 2 Coupe-Cabriolet (EM0/1) 2.0
Suspension arm
For other models of RENAULT
- Suspension arm Twingo c06 1.2 1996
- Suspension arm Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... 1998
- Suspension arm Renault Clio 2 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... 2001
- Suspension arm Renault Clio 2 1.5 dCi 2001
- Suspension arm Renault Clio 3 1.5 dCi 2005
-
Fast delivery
Shipping methods
-
