Back to catalogue
Lambda sensor Alphard AH10 2.4 159 hp Petrol
Info: TOYOTA Alphard I (AH10) 2.4 (ANH10W)
- Manuf. year (from - to): 09.2003-04.2008
- Power [kW]: 117
- Power [hp]: 159
- Cylinder capacity (cc): 2362
- Engine type: Petrol Engine
- Car body type: MPV
- Engine code: 2AZ-FE
- Manufacturer's model designation: ATH1_, MNH1_, ANH1_
- Catalytic Converter: ...
- Fuel Supply: Intake Manifold Injection/ Carburettor
- Engine Design: Straight
- Exhaust Emission Norm: ...
- Transmission: ...
- Model year from: ...
- Model year to: ...
-
Article №: 3922L092310/10 Based on over 5 customer ratingsIn stock£ 30,38incl. 20% VAT,
excl. delivery costs- Thread Size:
M18x1,5 - Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits:
4 - Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
10/10 Based on over 26 customer ratingsIn stock£ 33,48incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 39,37incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 01759 Regulating ProbeArticle №: 01759Please rate this productIn stock£ 27,88incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of pins:
4 - Length [mm]:
![Lambda sensor 580 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
580 - Condition: Brand new
Show OEM numbers -
Article №: SKLS-0141083Please rate this productIn stock£ 30,38incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
10/10 Based on over 6 customer ratingsIn stock£ 33,48incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 60210/10 Based on over 24 customer ratingsIn stock£ 41,28incl. 20% VAT,
excl. delivery costs- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 08997 Oxygen SensorArticle №: 08997Please rate this productIn stock£ 42,18incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Number of pins: 4
- Length [mm]: 650
- Condition: Brand new
Show OEM numbers -
Article №: 570112APlease rate this productIn stock£ 46,79incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Alternatively:
- Condition: Brand new
Show OEM numbers -
Article №: 81601Please rate this productIn stock£ 47,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Conductor Number:
636 - for OE number: 36531P28A01
- Quality: Zr High Impedance, OE EQUIVALENT
- Resistance [Ohm]: 16
- Condition: Brand new
Show OEM numbers -
Article №: 59-0014Please rate this productIn stock£ 52,08incl. 20% VAT,
excl. delivery costs- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Lambda sensor goCORE GCC9220005 with squeeze connector, with fastening/mounting material, without plug, Universal, before catalytic converter, after catalytic converter, M18x1,5, Regulating Probe, Diagnostic Probe, Heated, 4Article №: GCC9220005Please rate this productIn stock£ 65,86incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year to: 03/2005
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year to: 03/2005
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 10 012 0090Please rate this productIn stock£ 68,38incl. 20% VAT,
excl. delivery costs- Weight [g]: 120
- Condition: Brand new
-
Article №: YT-175310/10 Based on over 7 customer ratingsIn stock£ 4,08incl. 20% VAT,
excl. delivery costs- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
- Condition: Brand new
-
Article №: YT-175410/10 Based on over 37 customer ratingsIn stock£ 4,68incl. 20% VAT,
excl. delivery costs- Material: Chrome Vanadium Steel
- Spanner Size: 22
- Condition: Brand new
-
Article №: HT8G323Please rate this productIn stock£ 6,68incl. 20% VAT,
excl. delivery costs- Drive side (profile): Rectangle
- Drive [inch]: 1/2
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 50
- Vehicle type: VW, BMW, Audi, Ford, Skoda, SEAT
- Weight [g]: 225
- Condition: Brand new
-
Article №: 907G2-018.0/10 Based on over 1 customer ratingsIn stock£ 8,08incl. 20% VAT,
excl. delivery costs- Spanner Size: 1/2x7/8x50mmL
- Weight [g]: 250
- Condition: Brand new
-
Article №: HT8G3248.0/10 Based on over 5 customer ratingsIn stock£ 8,18incl. 20% VAT,
excl. delivery costs- Drive side (profile): Rectangle
- Drive [inch]: 3/8
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 80
- Weight [g]: 278
- Condition: Brand new
-
Article №: 9G1403Please rate this productIn stock£ 12,88incl. 20% VAT,
excl. delivery costs- Bolt Head-/Nut Design: Hexagon, Double Hexagon
- Spanner Size: 22 mm
- Drive [inch]: 3/8"
- Square Drive Tang Size [mm (inch)]: 10 (3/8")
- Condition: Brand new
-
Article №: YT-17528.0/10 Based on over 5 customer ratingsIn stock£ 15,47incl. 20% VAT,
excl. delivery costs- Material: Chrome Vanadium Steel, Chrome-Molybdenum Steel
- Length [mm]: 30-80
- Number of tools: 3
- Spanner Size: 22
- Condition: Brand new
Oxygen sensor for Toyota Alphard (_H1_) 2.4 (ANH10W) – the best products as chosen by customers
Customers also shopped for
Engine
Alphard (_H1_) 2.4 (ANH10W) Petrol 159 hp / 117 kW
Bestsellers
TOYOTA Alphard (_H1_) 2.4 (ANH10W)
Lambda sensor
For other models of TOYOTA
-
Fast delivery
Shipping methods
-
