Back to catalogue
Lambda sensor TOYOTA Highlander I (XU20) 2.4 156 hp Petrol
Info: TOYOTA Highlander I (XU20) 2.4 (ACU20_)
- Manuf. year (from - to): 06.2000-05.2007
- Power [kW]: 115
- Power [hp]: 156
- Cylinder capacity (cc): 2362
- Engine type: Petrol Engine
- Car body type: Closed Off-Road Vehicle
- Engine code: 2AZ-FE
- Manufacturer's model designation: _MCU2_, _ACU2_
- Catalytic Converter: ...
- Fuel Supply: Intake Manifold Injection/ Carburettor
- Engine Design: Straight
- Exhaust Emission Norm: ...
- Transmission: ...
- Model year from: ...
- Model year to: ...
-
Article №: 3922L092310/10 Based on over 4 customer ratingsIn stock£ 29,88incl. 20% VAT,
excl. delivery costs- Thread Size:
M18x1,5 - Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits:
4 - Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
10/10 Based on over 25 customer ratingsIn stock£ 33,58incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year from: 11/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 39,52incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year from: 11/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: SKLS-0141083Please rate this productIn stock£ 29,88incl. 20% VAT,
excl. delivery costs- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 290
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers - Thread Size:
-
10/10 Based on over 6 customer ratingsIn stock£ 33,58incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year from: 11/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 17004Please rate this productIn stock£ 36,58incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Condition: Brand new
-
Lambda sensor OSSCA 08997 Oxygen SensorArticle №: 08997Please rate this productIn stock£ 42,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Number of pins:
4 - Length [mm]:
![Lambda sensor 650 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
650 - Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 60210/10 Based on over 24 customer ratingsIn stock£ 45,98incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Article №: 570112APlease rate this productIn stock£ 46,84incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Alternatively:
- Condition: Brand new
Show OEM numbers -
Article №: 81601Please rate this productIn stock£ 47,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Conductor Number:
636 - for OE number: 36531P28A01
- Quality: Zr High Impedance, OE EQUIVALENT
- Resistance [Ohm]: 16
- Condition: Brand new
Show OEM numbers -
Article №: 177571Please rate this productIn stock£ 54,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Upper Right
- Oxygen Sensor: Regulating Probe
- Fitting Position: Lower Right
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 350
- Number of circuits: 4
- Weight [kg]: 0,080
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 59-0014Please rate this productIn stock£ 58,18incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/2000
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 01759 Regulating ProbeArticle №: 01759Please rate this productIn stock£ 59,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: Brand new
Show OEM numbers -
Article №: V70-76-0022Please rate this productIn stock£ 60,18incl. 20% VAT,
excl. delivery costs- Construction Year to: 08/2003
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Thread pre-greased
- Condition: Brand new
Show OEM numbers -
Lambda sensor goCORE GCC9220005 with squeeze connector, with fastening/mounting material, without plug, Universal, before catalytic converter, after catalytic converter, M18x1,5, Regulating Probe, Diagnostic Probe, Heated, 4Article №: GCC9220005Please rate this productIn stock£ 65,10incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Construction Year from: 11/2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Construction Year from: 09/2003
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: ADBP700025Please rate this productIn stock£ 66,58incl. 20% VAT,
excl. delivery costs- Construction Year to: 08/2003
- Fitting Position: Upper Left
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0,089
- Spanner Size: 22
- Observe service information:
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 33 10 6772Please rate this productIn stock£ 72,08incl. 20% VAT,
excl. delivery costs- Construction Year to: 08/2003
- Fitting Position: Upper Left
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0,089
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers -
Article №: 466016355226Please rate this productIn stock£ 72,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Condition: Brand new
Show OEM numbers -
Article №: 10 012 0090Please rate this productIn stock£ 75,18incl. 20% VAT,
excl. delivery costs- Weight [g]: 120
- Condition: Brand new
-
Please rate this productIn stock£ 75,98incl. 20% VAT,
excl. delivery costs- Construction Year to: 08/2003
- Fitting Position: Upper Left
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0,089
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: Brand new
Show OEM numbers
Oxygen sensor for Toyota Highlander I (XU20) 2.4 (ACU20_) – the best products as chosen by customers
Customers also shopped for
Engine
Highlander I (XU20) 2.4 (ACU20_) Petrol 156 hp / 115 kW
Bestsellers
TOYOTA Highlander I (XU20) 2.4 (ACU20_)
Lambda sensor
For other models of TOYOTA
-
Fast delivery
Shipping methods
-
