Back to catalogue
Lambda sensor Land Cruiser 100 4.7 235 hp Petrol
Info: TOYOTA Land Cruiser Amazon (J100) 4.7 (UZJ100_)
- Manuf. year (from - to): 01.1998-08.2007
- Power [kW]: 173
- Power [hp]: 235
- Cylinder capacity (cc): 4664
- Engine type: Petrol Engine
- Car body type: Closed Off-Road Vehicle
- Engine code: 2UZ-FE
- Manufacturer's model designation: UZJ100
- Catalytic Converter: with 3 way catalyst
- Fuel Supply: Intake Manifold Injection/ Carburettor
- Engine Design: V
- Exhaust Emission Norm: ...
- Transmission: Automatic Transmission, 4-speed
- Model year from: ...
- Model year to: ...
-
Article №: 92318Please rate this productIn stock£ 45,47incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 2UZ-FE
- Construction Year from: 09/2001
- not for country specific design: Russia
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter, Front
- Oxygen Sensor: Heated
- Length [mm]:
![Lambda sensor 500 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
500 - Number of circuits:
4 - Condition: Brand new
Show OEM numbers -
Article №: 09SKV9138.0/10 Based on over 1 customer ratingsIn stock£ 48,08incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]:
![Lambda sensor 12 Voltage [V]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/6.png)
12 - Resistor [Ohm]: 13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: 81584Please rate this productIn stock£ 51,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Fitting Position: Exhaust Manifold
- Cable Length [mm]: 500
- Number of pins:
4 - for OE number: 8946512540
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 617Please rate this productIn stock£ 51,58incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Construction Year to: 04/2005
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Article №: EOS-9083Please rate this productIn stock£ 53,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Front, before catalytic converter
- Country Specific Design: Russia
- not for country specific design: Russia
- Construction Year from: 03/2002, 09/2001
- Thread Size:
M18x1,5 - Oxygen Sensor: Heated, Planar probe
- Number of pins: 4
- Length [mm]: 270
- Condition: Brand new
Show OEM numbers -
Article №: V70-76-0030Please rate this productIn stock£ 53,68incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Number of pins: 4
- Length [mm]: 250
- Connector Shape: angular
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 647Please rate this productIn stock£ 55,68incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Overall Length [mm]: 300
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986602
- Condition: Brand new
Show OEM numbers -
Article №: 59-0014Please rate this productIn stock£ 58,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Fitting Position: before catalytic converter
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector/Clamp: Connector may need adjustment
- Condition: Brand new
Show OEM numbers -
Lambda sensor OSSCA 01759 Regulating ProbeArticle №: 01759Please rate this productIn stock£ 59,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 580
- Condition: Brand new
Show OEM numbers -
Article №: 0 258 986 614Please rate this productIn stock£ 59,78incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Overall Length [mm]: 300
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986617
- Condition: Brand new
Show OEM numbers -
Article №: 90272Please rate this productIn stock£ 59,88incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Heated
- Cable Length [mm]: 510
- Conductor Number:
4 - Quality: OE EQUIVALENT
- Condition: Brand new
Show OEM numbers -
Article №: SKLS-01400658.0/10 Based on over 1 customer ratingsIn stock£ 60,18(Price per item)
incl. 20% VAT,
excl. delivery costs- Fitting Position: Exhaust Manifold
- Required quantity: 2
- Oxygen Sensor: Regulating Probe
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 350
- Number of pins: 4
- Conductor Number: 4
- Connector Shape: rectangular
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers -
Article №: 09SKV058Please rate this productIn stock£ 60,38incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe
- TecDoc Engine Number: 2UZ-FE
- Construction Year to: 08/2002
- Length [mm]: 390
- Number of circuits: 4
- Weight [kg]: 0,13
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0236Please rate this productIn stock£ 62,08incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left, Right
- Construction Year from: 05/2005
- for OE number: 89465-60290, 89465-60300
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Thread pre-greased
- Cable Length [mm]: 250
- Number of pins: 4
- for OE number: 8946535580
- Quality: OE
- Weight [g]: 88
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 121
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0226Please rate this productIn stock£ 62,48incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left, Right
- Construction Year to: 05/2005
- for OE number: 89465-69175, 89465-80011
- Thread Size: Flange 44
- Oxygen Sensor: Heated, Finger probe, Oxygen Sensor
- Cable Length [mm]: 380
- Number of pins: 4
- for OE number: 8946529715
- Quality: OE
- Weight [g]: 132
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 172
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 62,68incl. 20% VAT,
excl. delivery costs- Construction Year to: 08/2002
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Required quantity: 2
- Oxygen Sensor: Heated
- Cable Length [mm]: 510
- Number of pins: 4
- for OE number: 8946520670
- Condition: Brand new
Show OEM numbers -
Article №: 95684Please rate this productIn stock£ 63,78incl. 20% VAT,
excl. delivery costs- TecDoc Engine Number: 2UZ-FE
- Construction Year from: 08/2001
- not for country specific design: Russia
- Oxygen Sensor: Regulating Probe
- Required quantity: 2
- Oxygen Sensor: Heated
- Length [mm]: 750
- Number of circuits: 4
- Condition: Brand new
Show OEM numbers -
Article №: DOX-0269Please rate this productIn stock£ 64,08incl. 20% VAT,
excl. delivery costs- Product line: Direct Fit
- Oxygen Sensor: Regulating Probe
- Fitting Position: Left, Right
- Exhaust System: for pre-catalytic converter
- for OE number: 89465-50150, 89465-60150
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Finger probe, Thread pre-greased
- Cable Length [mm]: 230
- Number of pins: 4
- for OE number: 8946520730
- Quality: OE
- Weight [g]: 86
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 119
- Condition: Brand new
Show OEM numbers -
Article №: ESL-AU-002Please rate this productIn stock£ 64,28incl. 20% VAT,
excl. delivery costs- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position:
before catalytic converter - Number of circuits: 5
- Fabrication Number: ESL-AU-002
- Condition: Brand new
Show OEM numbers -
Lambda sensor goCORE GCC9220005 with squeeze connector, with fastening/mounting material, without plug, Universal, before catalytic converter, M18x1,5, Regulating Probe, Heated, 4Article №: GCC9220005Please rate this productIn stock£ 64,99incl. 20% VAT,
excl. delivery costs- Supplementary Info: Universal
- Oxygen Sensor: Regulating Probe
- Construction Year to: 04/2005
- Fitting Position: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with squeeze connector, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: Brand new
Show OEM numbers
Oxygen sensor for Toyota LAND CRUISER 100 (UZJ100) 4.7 (UZJ100_) – the best products as chosen by customers
Customers also shopped for
Engine
LAND CRUISER 100 (UZJ100) 4.7 (UZJ100_) Petrol 235 hp / 173 kW
- EGR valve Land Cruiser 100 4.7
- Catalytic converter Land Cruiser 100 4.7
- Diesel particulate filter (DPF) Land Cruiser 100 4.7
- Exhaust silencer Land Cruiser 100 4.7
- Mounting kit, exhaust system Land Cruiser 100 4.7
- Exhaust pipe Land Cruiser 100 4.7
- Exhaust manifold gasket Land Cruiser 100 4.7
- Exhaust hanger Land Cruiser 100 4.7
- Exhaust gasket Land Cruiser 100 4.7
- Exhaust clamp Land Cruiser 100 4.7
Bestsellers
TOYOTA LAND CRUISER 100 (UZJ100) 4.7 (UZJ100_)
Lambda sensor
For other models of TOYOTA
-
Fast delivery
Shipping methods
-
