Tuning: car parts for MINI Convertible Top quality for a top price

Tuning MINI Convertible

Here you can find a range of top quality spare parts for your MINI Convertible

Tuning: MINI Convertible engine variants

Couldn’t find your car in the catalogue?

Enter your registration no below

Other car parts for MINI Convertible

Tuning: Spare parts for other cars

Hatchback
06/2001
COUNTRYMAN
01/2010
CLUBMAN
10/2006
PACEMAN
03/2012
Coupe
12/2010
Roadster
01/2011

Car parts for top models

Tuning: our bestsellers from this category

- Product line: Prime
- Diameter [mm]: 294
- Brake Disc Type: internally vented, slotted/perforated
- Surface: Coated
- Height [mm]: 44
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Minimum thickness [mm]: 20,4
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: for retrofitted equipment
- Drilled: yes
- Condition: New
Details
Article № : 09.A047.21 Brake disc
Car parts maker: BREMBO
In stock

£ 55,58

(Price per item)

incl. 20% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: perforated/vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 64,1
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 44
- Minimum thickness [mm]: 20,4
- Weight [kg]: 6,38
- Number of mounting bores: 1
- Observe service information:
- Drilled: yes
- Condition: New
Details
Article № : 43954 Brake disc
Car parts maker: FEBI BILSTEIN
In stock

£ 41,88

(Price per item)

incl. 20% VAT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- Supplementary Article / Supplementary Info Info 2: with screw set, without lock screw set, with clutch release bearing
- New Part:
- Weight [kg]: 18,87
- Number of mounting bores: 8
- Tightening Torque [Nm]: 45
- Tightening angle [degrees]: 40
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Details
free delivery

Article № : 837072 Clutch kit
Car parts maker: VALEO
(1)

In stock

£ 477,98

incl. 20% VAT
- Diameter [mm]: 208
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part:
- Hub Profile: 30 x 18 x 28 x 16
- Weight [kg]: 7,59
- Clutch: for vehicles with double clutch
- Clutch Type: for wet clutch
- Clutch Pressure Plate Outer Diameter [mm]: 208
- Outer Diameter 2 [mm]: 208
- Number of Teeth 1: 16
- Number of Teeth 2: 28
- Check OE number:
- Condition: New
Details
free delivery

Article № : 855201 Clutch kit
Car parts maker: VALEO
In stock

£ 805,28

incl. 20% VAT
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info: without pilot bearing
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Dual-mass flywheel without friction control plate
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 1,6
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 8
- Condition: New
Details
free delivery

Article № : 600 0069 00 Clutch kit
Car parts maker: LuK
(1)

In stock

£ 416,35

incl. 20% VAT
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, with guide sleeve, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Details
free delivery

Article № : 624 3968 00 Clutch kit
Car parts maker: LuK
In stock

£ 206,43

incl. 20% VAT
- for components see parts list:
- Lowered Suspension [mm]: 30
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions:
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: 25-30
- Vehicle type: Mini-N, UKL-L, UKL-C
- Condition: New
Details
free delivery

Article № : 29090-1 Lowering springs
Car parts maker: H&R
In stock

£ 167,28

incl. 20% VAT
- Quantity Unit: Axle Set
- Product line: Prime
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas
- Thickness [mm]: 18
- Height 1 [mm]: 54
- Height 2 [mm]: 65
- Width [mm]: 132
- WVA Number: 23915, 23916
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Condition: New
Details
Article № : P 06 034 Brake pad set
Car parts maker: BREMBO
(6)

In stock

£ 31,78

incl. 20% VAT
- Number of Teeth: 14
- Product line: KIT4P - CONVERSION KIT
- Supplementary Article / Supplementary Info: with single-mass flywheel
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part:
- Hub Profile: 25 x 22
- Weight [kg]: 17,12
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 220
- Condition: New
Details
free delivery

Article № : 835024 Clutch kit
Car parts maker: VALEO
In stock

£ 371,75

incl. 20% VAT
- Number of Teeth: 28
- Product line: KIT3P
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part:
- Hub Profile: 22,1 x 20,4
- Weight [kg]: 5,37, 5,59
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Details
free delivery

Article № : 832226 Clutch kit
Car parts maker: VALEO
In stock

£ 208,78

incl. 20% VAT
- Product line: Prime
- Diameter [mm]: 316
- Brake Disc Type: internally vented, slotted/perforated
- Surface: Coated
- Height [mm]: 45
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Minimum thickness [mm]: 20,4
- Machining: High-carbon
- Drilled: yes
- Condition: New
Details
Article № : 09.B754.21 Brake disc
Car parts maker: BREMBO
In stock

£ 59,98

(Price per item)

incl. 20% VAT
- Quantity Unit: Axle Set
- Product line: Prime
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas
- Thickness [mm]: 19
- Height 1 [mm]: 70
- Height 2 [mm]: 75
- Width [mm]: 129
- WVA Number: 25617, 25618
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Condition: New
Details
Article № : P 06 093 Brake pad set
Car parts maker: BREMBO
(6)

In stock

£ 58,88

incl. 20% VAT

Spares parts Shop

Best prices
Buycarparts.co.uk guarantees high-quality car parts at very attractive prices.
Wide choice
We currently have over 500,000 car parts in our product range.
Save on shipping
Free shipping within the UK applies to orders over £ 130 and excludes bulky items, tyres, or core parts.
Fast delivery
Shipping methods