Back to catalogue

Cv joint VW Golf 1k5 1.4 TSI 170 hp Petrol
Info: VW Golf V Variant (1K5) 1.4 TSI
- Manuf. year (from - to): 06.2007-07.2009
- Power [kW]: 125
- Power [hp]: 170
- Cylinder capacity (cc): 1390
- Engine type: Petrol Engine
- Car body type: Estate
- Drive: Front Wheel Drive
- Manufacturer's model designation: 1K5
- Brake type: ...
- Brake system: ...
- Engine Design: Straight
- Engine Cooling: Water-cooled
- Engine Management: Timing Chain
- Model year from: ...
- Model year to: ...
-
Article №: 5J0377Please rate this productIn stock£ 25,48incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Transmission Type: 6-Speed Dual-Clutch Transmission, 7-Speed Dual-Clutch Transmission
- Fitting Position: transmission sided
- Length [mm]:
32
- Internal Toothing differential side, conn. to transmission: 28
- Condition: Brand new
Show OEM numbers -
Article №: 5J000310/10 Based on over 4 customer ratingsIn stock£ 30,48incl. 20% VAT,
excl. delivery costs- Transmission Type: 6-Speed Manual Transmission
- Fitting Position: Front
- Fitting Position: outer, Front Axle Left, Front Axle Right, Wheel Side, Front Axle
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1,5
- Diameter 1 [mm]:
27,51
- Condition: Brand new
Show OEM numbers -
Article №: NPZ-VW-043Please rate this productIn stock£ 27,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Rear Axle, Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 33
- Sealing Ring Diameter [mm]: 59
- Joint Type: CV Joint
- Diameter [mm]: 82
- Fabrication Number: NPZ-VW-043
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Condition: Brand new
Show OEM numbers -
Article №: SKJK-02000038.0/10 Based on over 2 customer ratingsIn stock£ 30,48incl. 20% VAT,
excl. delivery costs- Transmission Type: 6-Speed Manual Transmission
- Fitting Position: Front
- Fitting Position: outer, Front Axle Left, Front Axle Right, Wheel Side, Front Axle
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1,5
- Diameter 1 [mm]:
27,51
- Condition: Brand new
Show OEM numbers -
Article №: 302015100015Please rate this productIn stock£ 31,98incl. 20% VAT,
excl. delivery costs- Length [mm]:
106
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Specification: BELL PIN LENGTH - 40
- Condition: Brand new
Show OEM numbers - Length [mm]:
-
Article №: KAD532Please rate this productIn stock£ 32,68incl. 20% VAT,
excl. delivery costs- Construction Year to: 06/2008
- Vehicle Identification Number (VIN) from: 1K-6-000001
- Transmission Type: Manual Transmission, 6-Speed Automatic Transmission, 6-Speed Manual Transmission
- Fitting Position: Wheel Side, Front Axle
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Diameter [mm]: 98
- Condition: Brand new
Show OEM numbers -
Article №: NPZ-SK-009Please rate this productIn stock£ 34,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Fabrication Number: NPZ-SK-009
- Condition: Brand new
Show OEM numbers -
Joint kit, drive shaft ABAKUS 141-04-008 Wheel Side, with fastening/mounting material, with grease lubrication, with bellowArticle №: 141-04-008Please rate this productIn stock£ 36,18incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side
- Length [mm]:
106
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16X1,5
- Supplementary Article / Supplementary Info Info 2: with bellow
- Lubrication: with grease lubrication
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Assy./disassy. by qualified personnel required!:
- Condition: Brand new
Show OEM numbers -
Article №: 10P9005-JPNPlease rate this productIn stock£ 37,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side, Front Axle
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Diameter [mm]: 98
- Outer Diameter 2 [mm]: 59,6
- Condition: Brand new
Show OEM numbers -
Article №: 771 0016 308.0/10 Based on over 2 customer ratingsIn stock£ 37,88incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle, Wheel Side
- Vehicle Identification Number (VIN) from: 1K-6-000 001
- Transmission Type: 6-Speed Manual Transmission
- Fitting Position: Wheel Side
- Vehicle Identification Number (VIN) from: 1K-6-000 001
- Transmission Type: 6-Speed Automatic Transmission
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Joint Type: CV Joint
- Diameter [mm]: 98
- Bellows Material: Thermoplast
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 41,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right
- Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission
- Internal Toothing differential side, conn. to transmission: 33
- Fabrication Number: NPW-VW-002
- Condition: Brand new
Show OEM numbers -
Article №: 304329-SET-MSPlease rate this productIn stock£ 41,88incl. 20% VAT,
excl. delivery costs- Construction Year to: 06/2008
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]:
106
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Joint Type: CV Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77F
- Diameter 1 [mm]:
27,5
- Net weight [kg]: 2,44
- Gross Weight [kg]: 2,54
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 42,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right
- Construction Year to: 06/2008
- Vehicle Identification Number (VIN) from: 1K-6-000 001
- Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission
- Supplementary Info: EXPERT KITS +
- Fitting Position: Wheel Side, Front Axle
- Thread Size: M20x1,5
- Weight [kg]: 1,897
- Drive Shaft: without ABS ring
- Bellows Material: Thermoplast
- Packaging width [cm]: 11,5
- Packaging height [cm]: 20
- Condition: Brand new
Show OEM numbers -
Article №: 302015100311Please rate this productIn stock£ 42,48incl. 20% VAT,
excl. delivery costs- Length [mm]:
105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 53
- Specification: BELL PIN LENGTH - 40
- Condition: Brand new
Show OEM numbers - Length [mm]:
-
Article №: 54980600101Please rate this productIn stock£ 42,58incl. 20% VAT,
excl. delivery costs- Quantity: 2
- Fitting Position: Front Axle
- Required quantity: 2
- Fitting Position: transmission sided
- Supplementary Article / Supplementary Info Info 2: with bellow
- Lubrication: with grease lubrication
- Inner Diameter [mm]: 33
- Condition: Brand new
Show OEM numbers -
Article №: C120004Please rate this productIn stock£ 43,48incl. 20% VAT,
excl. delivery costs- Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission
- Construction Year to: 06/2008
- Vehicle Identification Number (VIN) from: 1K-6-000 001
- Fitting Position: Wheel Side
- Length [mm]:
106, 105,50
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Specification: Groove Type: Inner
- Joint Diameter [mm]: 98,00
- Condition: Brand new
Show OEM numbers -
Article №: NPW-VW-031Please rate this productIn stock£ 45,28incl. 20% VAT,
excl. delivery costs- Fitting Position: transmission sided, Front Axle Left
- Sealing Ring Diameter [mm]: 46
- Joint Type: CV Joint
- Diameter [mm]: 98
- Internal Toothing differential side, conn. to transmission: 28
- External Toothing differential side: 40
- Fabrication Number: NPW-VW-031
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: Brand new
Show OEM numbers -
Article №: 15-1463Please rate this productIn stock£ 45,38incl. 20% VAT,
excl. delivery costs- Machined: with groove in internal component
- Outer Diameter [mm]: 97,95
- Seal Diameter [mm]: 59,5
- Internal Teeth, wheel side: 27
- External Teeth, wheel side: 36
- Fitting Position: Wheel Side
- Fitting Position: Wheel Side, Front Axle
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Thread Size: M16x1.5, M16x1,5
- Diameter [mm]: 97,9
- Bellows Material: Rubber
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 45,88incl. 20% VAT,
excl. delivery costs- New Part
- Construction Year to: 06/2008
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Info: EXPERT KITS +
- Fitting Position: Wheel Side
- Length [mm]:
106
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,5
- Joint Type: CV Joint
- Thread Size: M16x1,5
- Weight [kg]: 2,483
- Supplementary Article / Supplementary Info Info 2: with bellow
- Lubrication: with grease lubrication
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Bellows Material: Thermoplast
- Packaging width [cm]: 11,5
- Packaging height [cm]: 20
- Condition: Brand new
Show OEM numbers -
Article №: 72748.0/10 Based on over 1 customer ratingsIn stock£ 45,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Vehicle Identification Number (VIN) from: 1K-6-000001
- Sealing Ring Diameter [mm]: 59, 59,5
- Joint Type: CV Joint
- Diameter 1 [mm]:
28
- Condition: Brand new
Show OEM numbers
Constant velocity joint for Volkswagen Golf V Variant (1K5) 1.4 TSI – the best products as chosen by customers
Customers also shopped for
Drive shaft and cv joint

Bestsellers

Cv joint