Back to catalogue
Cv joint VW Polo Variant 1.7 SDI 57 hp Diesel
Info: VW Polo III Variant (6V5) 1.7 SDI
- Manuf. year (from - to): 08.1997-09.2001
- Power [kW]: 42
- Power [hp]: 57
- Cylinder capacity (cc): 1715
- Engine type: Diesel
- Car body type: Estate
- Drive: Front Wheel Drive
- Manufacturer's model designation: 6KV5
- Brake type: ...
- Brake system: Hydraulic
- Engine Design: Straight
- Engine Cooling: Water-cooled
- Engine Management: Timing Belt
- Model year from: ...
- Model year to: ...
-
Please rate this productIn stock£ 41,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right
- Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission
- Internal Toothing differential side, conn. to transmission: 33
- Exchange Part:
- Fabrication Number: NPW-VW-002
- Condition: Brand new
Show OEM numbers -
Article №: 14860Please rate this productIn stock£ 44,38incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side, Front Axle
- Weight [kg]: 1,5
- Observe service information:
- Condition: Brand new
Show OEM numbersItem Joint kit, drive shaft includes the following components:- 1 - Bellow Set, drive shaft (03595);
- 1 - Joint, drive shaft (17012);
-
Article №: VKJA 80028.0/10 Based on over 2 customer ratingsIn stock£ 45,98incl. 20% VAT,
excl. delivery costs- Engine Code: AKW
- Fitting Position: transmission sided, Front Axle
- Length [mm]:
![Cv joint 32 Length [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/203.png)
32 - Joint Type: Flexible Joint Disc
- Machined: with groove in inner part (inside)
- Diameter [mm]: 94
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 78
- Bore Diameter [mm]: 8,2
- Number of bores: 6
- Condition: Brand new
Show OEM numbers -
Article №: V10-7274Please rate this productIn stock£ 48,18incl. 20% VAT,
excl. delivery costs- Engine Code: AKW
- Fitting Position: Front Axle
- Supplementary Info: EXPERT KITS +
- Fitting Position: transmission sided
- Weight [kg]: 1,45
- Packaging width [cm]: 11,5
- Packaging height [cm]: 20
- Packaging Depth [cm]: 11,5
- Condition: Brand new
Show OEM numbers -
Article №: V10-7421Please rate this productIn stock£ 48,78incl. 20% VAT,
excl. delivery costs- Transmission Type: Manual Transmission
- Fitting Position: Front Axle
- Supplementary Info: EXPERT KITS +
- Fitting Position: transmission sided
- Joint Type: CV Joint
- Weight [kg]: 1,54
- for OE number: 6Q0 498 103 A
- Packaging width [cm]: 13
- Packaging height [cm]: 11,5
- Packaging Depth [cm]: 13
- Condition: Brand new
Show OEM numbers -
Article №: 620033Please rate this productIn stock£ 49,18incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side
- Length [mm]: 32
- Specification: Groove type: INNER
- Internal Toothing differential side, conn. to conn. shaft: 33
- Condition: Brand new
Show OEM numbers -
Article №: 8540 29201Please rate this productIn stock£ 49,88incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Diameter [mm]:
![Cv joint 94 Diameter [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/200.png)
94 - Internal Toothing differential side, conn. to transmission: 33
- Condition: Brand new
Show OEM numbers -
Article №: CW-2502Please rate this productIn stock£ 50,78incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
- Construction Year from: 10/1997
- Length [mm]: 129
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in inner part (inside)
- Joint Diameter [mm]: 79
- Condition: Brand new
Show OEM numbers -
Article №: 302118Please rate this productIn stock£ 52,18incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part:
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: Brand new
Show OEM numbers -
Article №: 302123Please rate this productIn stock£ 54,28incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part:
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: Brand new
Show OEM numbers -
Article №: 302230Please rate this productIn stock£ 56,78incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: transmission sided, Front Axle Left, Front Axle Right
- Vehicle Identification Number (VIN) to: 6KV050000
- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: transmission sided, Front Axle Right
- Vehicle Identification Number (VIN) from: 6KV050001
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 94
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 78
- Bore Diameter [mm]: 8,20
- Number of bores: 6
- New Part:
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: Brand new
Show OEM numbers -
Article №: 22461Please rate this productIn stock£ 59,88incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part:
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: Brand new
Show OEM numbers -
Article №: 2311-GVPlease rate this productIn stock£ 62,48incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle, transmission sided
- Joint Type: Flexible Joint Disc
- Diameter [mm]: 94
- Internal Toothing differential side, conn. to transmission: 33
- Model Year to: 2000
- Quantity: 1
- Packaging length [cm]: 20,0
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: Brand new
Show OEM numbers -
Article №: VKJA 3021Please rate this productIn stock£ 64,08incl. 20% VAT,
excl. delivery costs- Engine Code: AKW
- Fitting Position: Wheel Side, Front Axle
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 51,5
- Machined: with groove in inner part (inside)
- Thread Size: M20x1,5
- Diameter [mm]: 80,65
- Condition: Brand new
Show OEM numbers -
Please rate this productIn stock£ 70,58incl. 20% VAT,
excl. delivery costs- Fitting Position: transmission sided, Front Axle
- Weight [kg]: 1,8
- for OE number: 321 498 350 X
- Observe service information:
- Condition: Brand new
Show OEM numbersItem Joint kit, drive shaft includes the following components:- 1 - Bellow, drive shaft (03334);
- 1 - Joint, drive shaft (33241);
- 1 - Spring Washer (03336);
- 1 - Clamping Clip (38758);
- 6 - Bolt, propshaft flange (03004);
- 1 - Circlip (03335);
- 1 - Molybdenum Grease (02582);
- 1 - Nut, stub axle (02160);
-
Article №: 20258Please rate this productIn stock£ 77,58incl. 20% VAT,
excl. delivery costs- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: transmission sided, Front Axle Left, Front Axle Right
- Vehicle Identification Number (VIN) to: 6KV050000
- Construction Year from: 11/1997
- Construction Year to: 08/1999
- Fitting Position: transmission sided, Front Axle Right
- Vehicle Identification Number (VIN) from: 6KV050001
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 94
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 78
- Bore Diameter [mm]: 8,20
- Number of bores: 6
- New Part:
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: Brand new
Show OEM numbers -
Free deliveryArticle №: CT-1011Please rate this productIn stock£ 161,28incl. 20% VAT,
excl. delivery costs- Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Construction Year from: 11/1997
- Vehicle Identification Number (VIN) to: 6K V-050 000
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Joint Diameter [mm]: 94
- Internal Toothing differential side, conn. to conn. shaft: 33
- Condition: Brand new
Show OEM numbers -
Article №: CV7901APlease rate this productIn stock£ 17,98incl. 20% VAT,
excl. delivery costs- Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
- External Toothing differential side: 32
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Thread Size: M20x1,5
- Length [mm]: 130
- Diameter 1 [mm]:
![Cv joint 81 Diameter 1 [mm]](https://cdn.pkwteile.de/uploads/icons/product/parameter/pkw/gl/341.png)
81 - Diameter [mm]: 50
- Sealing Ring Diameter [mm]: 50
- Outer Diameter 2 [mm]: 81
- Condition: Brand new
Show OEM numbers -
Article №: CV0108BPlease rate this productIn stock£ 20,38incl. 20% VAT,
excl. delivery costs- Fitting Position: transmission sided, Front Axle Left, Front Axle Right
- Internal Toothing differential side, conn. to transmission: 33
- Diameter 1 [mm]: 93
- Condition: Brand new
Show OEM numbers -
Article №: 302230-SET-MSPlease rate this productOut of StockInform on availability£ 18,38incl. 20% VAT,
excl. delivery costs- Fitting Position: transmission sided, Front Axle
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Joint Diameter [mm]: 94
- Internal Toothing differential side, conn. to conn. shaft: 33
- Net weight [kg]: 1,37
- Gross Weight [kg]: 1,38
- Condition: Brand new
Show OEM numbers
Constant velocity joint for Volkswagen Polo Variant (6V5) 1.7 SDI – the best products as chosen by customers
Customers also shopped for
Drive shaft and cv joint
Polo Variant (6V5) 1.7 SDI Diesel 57 hp / 42 kW
Bestsellers
VW Polo Variant (6V5) 1.7SDI
Cv joint
For other models of VW
-
Fast delivery
Shipping methods
-
