

MAPCO Anti-roll bar link rear and front
Further car makes for MAPCO Sway bar link
HIGH PERFORMANCE STANDARD for stabilizer links made of 12 mm round steel bars
- Resistance to bending under high stress
- Reinforced round bars
Use of semi-synthetic grease
- Semi-synthetic grease for permanently lubricated ball joints
- High corrosion protection
- Reduced jerks
Mirror-smooth surface
- Reduced abrasion and wear
- Increased service life
- Short break-in period
Special boots
- Extended operating temperature range
- High durability of the boots
The innovative HPS technology is registered and additionally certified by the TÜV Rheinland Group. The functionally significant quality characteristics were thoroughly checked in extensive test procedures. During the tests, special attention was paid to the strength of the material used, resistance to environmental effects, and wear resistance. After the excellent performance of the HPS products in all aspects was proved by the test results, the components were certified by TÜV Rheinland. Each product was assigned a unique certificate number which can be found on the MAPCO® website and, of course, at TÜV.
Exceed the standards with MAPCO® HPS products. MAPCO® quality products: tested in Germany - successful worldwide. MAPCO® Autotechnik products are sold worldwide and are available in many countries. Many customers rely on the tested quality from Germany. Great success in many international markets is a clear evidence of high operating performance of MAPCO® products and customer satisfaction.
MAPCO® Autotechnik car parts are produced with the same specifications as the original ones of the corresponding vehicle manufacturers. However, in some cases, the quality can be significantly improved by our in-house engineers by turning a standard item into an innovative MAPCO® High Performance Standard (HPS) product. MAPCO® HPS components are considerably superior to original parts in terms of quality, and are extremely durable. The HPS stabilizer links are made of 12 mm thick round steel bars, while the thickness of the material of manufacturer's original part is usually only 8 mm. The MAPCO®-HPS product offers higher resistance to bending, which extends the service life of the ball joints. MAPCO® HPS products are technically innovative and wear-resistant.
7.68/10
(Reviews-2153)
Parameters rating
Product cost
+1850 35-Product quality
+1644 41-Packaging quality
+862 52-Manufacturer
+1020 100-Warranty
+1351 63-Product cost
+1 -1Product quality
+1 -1Packaging quality
+1 -1Manufacturer
+1 -1Warranty
+1 -1