
Engine cooling system DODGE
Find up-to-date offers for other spare parts DODGE Cooling system
reset
Are you looking for Engine cooling system DODGE? Then you have come to the right place!
Bestsellers: Cooling car spares Dodge
-
- Water pump impeller material: Metal
- Pulleys: with belt pulley
- Impeller Diameter [mm]: 70
- Operating Mode: Mechanical
- Supplementary Article / Supplementary Info: with gasket/seal
- Belt Pulley Ø [mm]: 52
- Number of blades/vanes: 10
- Condition: New
DetailsArticle № : 1260W0200 RIDEX 1260W0200
Car parts maker: RIDEXIn stock
£ 21,88incl. 20% VAT -
- Number of Teeth: 19
- Water pump impeller material: Metal
- Water Pump Type: for timing belt drive
- Supplementary Article / Supplementary Info: with gasket/seal
- Housing material: Stainless Steel
- Chemical Properties: Heat-resistant
- Condition: New
DetailsArticle № : 1260W0334 RIDEX 1260W0334
Car parts maker: RIDEXIn stock
£ 24,78incl. 20% VAT -
- Number of Teeth: 19
- Material: Cast Aluminium
- Impeller Diameter [mm]: 64
- Water Pump Type: for timing belt drive
- Supplementary Article / Supplementary Info: with gaskets/seals
- Water Pump Pulley Diameter [mm]: 56
- Tensioner Pulley Actuation: Mechanical
- Fitting Depth [mm]: 48
- Condition: New
DetailsArticle № : 1260W0040 RIDEX 1260W0040
Car parts maker: RIDEXIn stock
£ 25,68incl. 20% VAT -
- Number of Teeth: 19
- Water pump impeller material: Metal
- Impeller Diameter [mm]: 64
- Water Pump Type: for timing belt drive
- Operating Mode: Mechanical
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Supplementary Article / Supplementary Info: do not use sealant
- Number of blades/vanes: 7
- Water Pump Pulley Diameter [mm]: 56,23
- Condition: New
DetailsArticle № : PA1355 GRAF PA1355
Car parts maker: GRAFIn stock
£ 38,08incl. 20% VAT -
- Housing Type: with housing, two-part housing
- Operating Mode: Mechanical, Vacuum-controlled
- Supplementary Article / Supplementary Info Info 2: switchable water pump, with vacuum bypass
- Supplementary Article / Supplementary Info: with gaskets/seals
- for OE number: A 651 200 16 51
- Condition: New
Detailsfree deliveryArticle № : P1613A-TH HEPU P1613A-TH
Car parts maker: HEPUIn stock
£ 248,48incl. 20% VAT -
- Opening Temperature [°C]: 87
- Diameter 1 [mm]:
54
- Supplementary Article / Supplementary Info: with gasket/seal
- Height 1 [mm]: 21
- Height 2 [mm]: 38,5
- Packaging width [cm]: 6,70
- Packaging length [cm]: 8,7
- Packaging height [cm]: 9,20
- Net Weight [g]: 62
- Condition: New
DetailsArticle № : TX 3 87D MAHLE TX 3 87D
Car parts maker: MAHLEIn stock
£ 15,28incl. 20% VAT -
- Opening Temperature [°C]: 80
- Supplementary Article / Supplementary Info: with gaskets/seals
- Housing Type: without housing
- Material: Metal
- Condition: New
DetailsArticle № : TH13380G1 GATES TH13380G1
Car parts maker: GATESIn stock
£ 12,28incl. 20% VAT -
- Number of Teeth: 19
- Material: Cast Aluminium
- Water pump impeller material: Metal
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Observe service information:
- Weight [kg]: 0,717
- Number of blades/vanes: 8
- Number of grooves: 19
- Seal Material: Rubber
- Condition: New
DetailsArticle № : 24360 FEBI BILSTEIN 24360
Car parts maker: FEBI BILSTEINIn stock
£ 30,28incl. 20% VAT -
- Supplementary Article / Supplementary Info: with gasket/seal
- Weight [kg]: 0,793
- Packaging length [cm]: 13
- Packaging width [cm]: 13
- Packaging height [cm]: 16
- Condition: New
DetailsArticle № : WP6003 CONTITECH WP6003
Car parts maker: CONTITECHIn stock
£ 34,68incl. 20% VAT -
- Pulleys: with belt pulley
- Water Pump Type: for V-ribbed belt use
- Operating Mode: Mechanical
- Number of ribs: 6
- Condition: New
DetailsArticle № : 538 0682 10 INA 538 0682 10
Car parts maker: INAIn stock
£ 82,98incl. 20% VAT -
- Number of Teeth: 19
- Water Pump Type: for timing belt drive
- Supplementary Article / Supplementary Info: with gasket/seal
- Condition: New
DetailsArticle № : 538 0089 10 INA 538 0089 10
Car parts maker: INAIn stock
£ 33,78incl. 20% VAT -
- Opening Temperature [°C]: 79
- Diameter 1 [mm]:
67
- Diameter 2 [mm]:
43
- Supplementary Article / Supplementary Info: with gasket/seal
- Height 2 [mm]: 25,5
- Packaging width [cm]: 6,70, 6,71
- Packaging length [cm]: 8,7
- Packaging height [cm]: 9,19, 9,20
- Net Weight [g]: 117, 118
- Condition: New
DetailsArticle № : TX 18 79D MAHLE TX 18 79D
Car parts maker: MAHLEIn stock
£ 13,28incl. 20% VAT
-
Best prices
Buycarparts.co.uk offers Engine cooling system of high quality for DODGE at very attractive prices.
-
Wide choice
We currently have over 500,000 car parts in our product range.
-
Save on shipping
Free shipping within the UK applies to orders over £ 140 and excludes bulky items, tyres, or core parts.
-
Fast delivery
Shipping methods
-